A
-
A356 alloy
Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
-
ABAQUS
Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
-
ABAQUS
Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
-
Abdominal indentation
Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
-
Abutment
Impact of additive manufacturing on advances in the design and production of the dental implants [Volume 54, Issue 2, 2023, Pages 323-335]
-
ACTIN CORTEX
Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
-
Adaptive Neuro-Fuzzy Interface System (ANFIS)
A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
-
Additive Manufacturing
A Nonlinear Error Compensator for FDM 3D Printed Part Dimensions Using a Hybrid Algorithm Based on GMDH Neural Network [Volume 52, Issue 3, 2021, Pages 451-477]
-
Additive Manufacturing
Impact of additive manufacturing on advances in the design and production of the dental implants [Volume 54, Issue 2, 2023, Pages 323-335]
-
Adhesive Joint
Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
-
Adhesively bonded single-lap joint
Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
-
Aerodynamic flight load
Design and simulation Sandwich Composite Fairing Shells Using FEM Analyzing [Volume 53, Issue 1, 2022, Pages 55-65]
-
Aerodynamic forces
Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
-
Aftertreatment technique
Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
-
Agglomeration
A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
-
Air-backed plate
Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
-
Aircraft propellers
Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]
-
Airy's stress potential functions
ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
-
Airy stress potential function
GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
-
Airy stress potential function
Elzaki transform method for finding solutions to two-dimensional elasticity problems in polar coordinates formulated using Airy stress functions [Volume 51, Issue 2, 2020, Pages 302-310]
-
Airy stress potential function
Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
-
Akbari-Ganji method,,
Akbari-Ganji Homotopy Perturbation Method for Analyzing the Pulsatile Blood Flow in Tapered Stenosis Arteries under the Effect of Magnetic Field together with the Impact of Mass and Heat Transfer [Volume 53, Issue 4, 2022, Pages 543-570]
-
Aluminium alloy
Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
-
Analysis
Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
-
Analysis of Variance
Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
-
Analysis of variance (ANOVA)
An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
-
Analytical elasticity solution
Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
-
Analytical formulation
A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [Volume 52, Issue 3, 2021, Pages 408-422]
-
Analytical solutions
Modeling and Simulations of Multi-dimensional Thermal Behaviours of Plates during Friction Stir Additive Manufacturing [Volume 53, Issue 3, 2022, Pages 363-378]
-
Angle Beam Transducer
Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
-
Angular Velocity
Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
-
Anisotropic porous medium,,
Effect of Electric field Modulation on the Onset of Electroconvection in a Dielectric Fluid Anisotropic Porous Layer [Volume 53, Issue 4, 2022, Pages 510-523]
-
Anisotropy
Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
-
Ankle
Biomechanical differences between individuals with chronic ankle instability, copers and healthy controls in the countermovement jump on the force plate [Volume 53, Issue 3, 2022, Pages 356-362]
-
Ankle sprain
Use a biomechanical experimental setup to analysis the reliability of force plate postural control parameters in chronic ankle instability patients, copers and healthy control [Volume 53, Issue 2, 2022, Pages 183-189]
-
Annular flow
Numerical Details of Convective Heat Transfer by Micro-Encapsulated PCM Case Study: Annular Slurry Flow [Volume 53, Issue 1, 2022, Pages 66-82]
-
Annulus
Performance Study of Partially Heated Annulus Filled with Two-Phase Nanofluid: Energy Perspective [Volume 55, Issue 1, 2024, Pages 39-50]
-
ANSWER SCRIPT
A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
-
ANSYS-FLUENT
Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
-
Approximate solution
Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
-
Artificial Neural Network
Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
-
Artificial Neural Network
Parametric Analysis for Torque Prediction in Friction Stir Welding Using Machine Learning and Shapley Additive Explanations [Volume 55, Issue 1, 2024, Pages 113-124]
-
Aspect ratio
A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
-
Asymmetrical wire rolling
Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
-
Asymptotical Stability
From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
-
ATES محیط متخلخل
عوامل مؤثر بر استفاده از منابع آب زیرزمینی به عنوان مخزن ذخیره انرژی [Volume 44, Issue 1, 2011, Pages 61-70]
-
Atmospheric boundary layer
Numerical Simulation of Atmospheric Boundary Layer Over Laboratory Scale Two-Dimensional Hill Using Pressure-Driven Boundary Condition [Volume 53, Issue 3, 2022, Pages 379-392]
-
ATOMIC FORCE MICROSCOPY
Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
-
Atomistic modelling
Effect of Different Kernel Normalization Procedures on Vibration Behaviour of Calibrated Nonlocal Integral Continuum Model of Nanobeams [Volume 53, Issue 4, 2022, Pages 639-656]
-
Attached mass-spring system
Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
-
Attenuation
Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
-
A unified beam theory
On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
-
Autofrettage
Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
-
Autonomous Robots
Routing and avoiding collisions of autonomous robots in unknown environments with fixed and moving obstacles [Volume 53, Issue 2, 2022, Pages 169-182]
-
Auxetic structure
Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
-
Auxetic structures
Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis [Volume 54, Issue 4, 2023, Pages 467-481]
-
Auxetic viscoelastic
Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
-
Avoiding Obstacles
Routing and avoiding collisions of autonomous robots in unknown environments with fixed and moving obstacles [Volume 53, Issue 2, 2022, Pages 169-182]
-
Axially functionally graded beam
Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
-
Axially Functionally Graded Beams
Geometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
-
Axially functionally graded materials,,
An innovative formulation for buckling analysis of nano-tapered Timoshenko beams with axially varying materials [Volume 54, Issue 1, 2023, Pages 87-110]
-
Axially graded material
A Ritz Formulation for Vibration Analysis of Axially Functionally Graded Timoshenko-Ehrenfest Beams [Volume 53, Issue 1, 2022, Pages 102-115]
-
Axial Vibration
Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
-
Axisymmetric elasticity problem
CLOSED FORM SOLUTIONS OF THE NAVIER'S EQUATIONS FOR AXISYMMETRIC ELASTICITY PROBLEMS OF THE ELASTIC HALF-SPACE [Volume 52, Issue 4, 2021, Pages 588-618]
B
-
Backstepping
A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
-
Balancing
Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
-
Ball mill
Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
-
Ball valve
Numerical simulation of the effect of particle size on the erosion damage in ball valves of pressure reducing station [Volume 52, Issue 1, 2021, Pages 1-11]
-
Ball valve
Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
-
Basic Displacement Functions (BDFs)
Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
-
Beam
Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
-
Beam
Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
-
Beam Modal Function
Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
-
Bearing fault detection
A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
-
Behavior-Based Control
Implementation of Behavior-Based Navigation Algorithm on Four-Wheel Steering Mobile Robot [Volume 52, Issue 4, 2021, Pages 619-641]
-
Beltrami – Michell stress compatibility equation
Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
-
Beltrami-Michell stress compatibilty equations
ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
-
Bending
A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
-
Bending
A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
-
Bending analysis
A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
-
Bending moment
Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
-
Bennett Methodology
Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
-
Bentonite
Numerical Simulation of Laminar Flow of a Non-Newtonian Bentonite Solution in a Horizontal Pipe [(Articles in Press)]
-
Bernoulli-Euler
Pull-in behaviour of a micro switch actuated by the electrostatic under a uniform longitudinal magnetic field based on nonlocal couple stress theory [Volume 54, Issue 4, 2023, Pages 577-587]
-
BESO
Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
-
Bi-dimensional
Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
-
Bi directional functionally graded materials
Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
-
Bi-directional functionally graded materials (BDFGMs)
Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
-
Bidirectional Functionally graded plates
Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
-
Bi-directional temperature fields
Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
-
Biharmonic equation
Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
-
Biharmonic function
First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
-
Biological analytes
Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
-
Biological analytes
A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
-
Biological applications
On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
-
Biological nanosensor
A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
-
Biological Nano-Sensor
Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
-
Biosensors
Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
-
Biot
Functionally graded saturated porous structures: A review [Volume 53, Issue 2, 2022, Pages 297-308]
-
Bio-thermoelasticity
Analysis of the Bio-Thermoelasticity Response of Biological Tissues Subjected to Harmonic Heating Using a Refined Green–Lindsay Model [Volume 54, Issue 4, 2023, Pages 588-606]
-
Blood Flow
Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
-
Blood vessel
Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
-
Bone
The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
-
Boron Nitride Nanotube
Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
-
Bottom-Hole Pressure
Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
-
Bottom-Hole Pressure (BHP)
Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
-
Bottom-Hole Pressure (BHP)
Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
-
BOUC-WEN MODEL
Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
-
Boundary conditions
Numerical Simulation of Atmospheric Boundary Layer Over Laboratory Scale Two-Dimensional Hill Using Pressure-Driven Boundary Condition [Volume 53, Issue 3, 2022, Pages 379-392]
-
Boundary conditions
Efficient Kinematic model for Stability Analysis of Imperfect Functionally Graded Sandwich Plates with Ceramic middle layer and Varied Boundary Edges [Volume 55, Issue 2, 2024, Pages 184-200]
-
Boussinesq approximation
Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
-
Box-Behnken design
Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
-
Brain tumor
Preparation of cationized albumin nanoparticles loaded indirubin by high pressure hemogenizer. [Volume 52, Issue 3, 2021, Pages 498-506]
-
B-REP
A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
-
Brownian motion
Numerical study of Casson nanofluid over an elongated surface in presence of Joule heating and viscous dissipation: Buongiorno model analysis [Volume 53, Issue 3, 2022, Pages 414-430]
-
Brownian motion
Effects of Joule heating and viscous dissipation on Casson nanofluid flow over a stretched sheet with chemical reaction [Volume 53, Issue 4, 2022, Pages 478-493]
-
BUCKLED PLATE
A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
-
Buckling
Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
-
Buckling
Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
-
Buckling
A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
-
Buckling
Assessment of Radial basis function based meshfree method for the buckling analysis of rectangular FGM plate using HSDT and Strong form formulation [Volume 53, Issue 3, 2022, Pages 332-347]
-
Buckling
Stability Analysis of a Laminated Composite Micro Scaled Beam Embedded in Elastic Medium using Modified Coupled Stress Theory [Volume 55, Issue 1, 2024, Pages 26-38]
-
Buckling analyses
Analyzing the Buckling Behavior of In-plane Bidirectional Functionally Graded Porous Plates [(Articles in Press)]
-
Buckling analysis
Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
-
Buckling analysis
A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
-
Buckling analysis
Buckling analysis of three-dimensional functionally graded Euler-Bernoulli nanobeams based on the nonlocal strain gradient theory [Volume 53, Issue 1, 2022, Pages 24-40]
-
Buckling analysis
Efficient Kinematic model for Stability Analysis of Imperfect Functionally Graded Sandwich Plates with Ceramic middle layer and Varied Boundary Edges [Volume 55, Issue 2, 2024, Pages 184-200]
-
Buckling analysis
Stability analysis of functionally graded graphene platelets-reinforced nanocomposite shells [(Articles in Press)]
-
Buckling and nonlinear Post-buckling analysis
Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
-
Buckling Behaviour
Buckling analysis of 2D functionally graded porous beams using novel higher order theory [Volume 53, Issue 3, 2022, Pages 393-413]
C
-
Calculation method
A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
-
Calculus of variations
Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
-
Calibration process
Effect of Different Kernel Normalization Procedures on Vibration Behaviour of Calibrated Nonlocal Integral Continuum Model of Nanobeams [Volume 53, Issue 4, 2022, Pages 639-656]
-
Carbon/Epoxy
Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
-
Carbon nanostructures
Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
-
Carbon Nanotube
Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
-
Carbon Nanotube
Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
-
Carbon nanotube (CNT)
A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
-
Carbon nanotube (CNT)
A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
-
Carbon nanotube reinforced composite
Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading [Volume 53, Issue 1, 2022, Pages 1-23]
-
Carbon nanotubes
Longitudinal Magnetic Field Effect on Torsional Vibration of Carbon Nanotubes [Volume 49, Issue 2, 2018, Pages 304-313]
-
Carbon nanotubes
Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
-
Carbon Nano Tubes (CNTs)
Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
-
Carreau Hybrid Nanofluid
Numerical Investigation of MHD Carreau Hybrid Nanofluid Flow over a Stretching Sheet in a Porous Medium with Viscosity Variations and Heat Transport [Volume 54, Issue 3, 2023, Pages 410-424]
-
Carrier density
Behavior of functionally graded semiconducting rod with internal heat source under a thermal shock [Volume 55, Issue 1, 2024, Pages 51-61]
-
Car Seat Frame
The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
-
Cartesian Coordinates
Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
-
Casimir force
Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
-
CaSO4 solution
Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
-
Casson Fluid
A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
-
Casson Fluid
Numerical study of Casson nanofluid over an elongated surface in presence of Joule heating and viscous dissipation: Buongiorno model analysis [Volume 53, Issue 3, 2022, Pages 414-430]
-
Casson Fluid
Effects of Joule heating and viscous dissipation on Casson nanofluid flow over a stretched sheet with chemical reaction [Volume 53, Issue 4, 2022, Pages 478-493]
-
Casson Fluid
The onset of Casson fluid convection in a permeable medium layer produced by purely inner heating with magnetic field [(Articles in Press)]
-
Casting Speed
Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
-
Cathodic Protection System
The Application of Genetic Algorithm to the Optimization of the Maintenance Schedule at a Certain Level of availability and reliability: Case study Cathodic Protection System of Gas Distribution Steel Network [Volume 54, Issue 3, 2023, Pages 455-466]
-
Cationated Human Serum Albumin
Preparation of cationized albumin nanoparticles loaded indirubin by high pressure hemogenizer. [Volume 52, Issue 3, 2021, Pages 498-506]
-
Cavitation
Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
-
Cell Biomechanics
The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
-
CELL CYTOSKELETON
Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
-
Cell isolation
A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
-
Cell Mechanics
A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
-
Center of motion
Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
-
Central composite design
Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
-
Central opening
Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
-
Centrifugal Pump
Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
-
Centrifugal pump curves
Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
-
Centrifugal pump design
Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
-
CFD
Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
-
CFD
Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
-
CFD
Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
-
CFD
A Validation Methodology for Urea Spray on Selective Catalytic Reduction Systems [Volume 53, Issue 2, 2022, Pages 157-168]
-
CFD Simulation
Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
-
CFD Simulation
Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
-
CFD Simulation
Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
-
Characteristics of nanoliposomes
Physical and chemical properties of nano-liposome, application in nano medicine [Volume 52, Issue 4, 2021, Pages 751-767]
-
Chebyshev polynomial
Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
-
Chebyshev polynomial
Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
-
Chemical reaction
Effects of Joule heating and viscous dissipation on Casson nanofluid flow over a stretched sheet with chemical reaction [Volume 53, Issue 4, 2022, Pages 478-493]
-
Chemical reaction
Radiation effect on the flow of Magneto Hydrodynamic nanofluids over a stretching surface with Chemical reaction [Volume 53, Issue 4, 2022, Pages 494-509]
-
Chemical reaction
Therapeutic applications of Darcy-Forchheimer hybrid nanofluid flow and mass transfer over a stretching sheet [Volume 53, Issue 4, 2022, Pages 585-598]
-
Chemicals
Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
-
Chemicals
A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
-
Circular and annular nanoplate
Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
-
Circular Cylindrical Shell
Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
-
Circular pipe
Analytical solution of pulsating flow and forced convection heat transfer in a pipe filled with porous medium [Volume 52, Issue 4, 2021, Pages 570-587]
-
Circumferential groove
Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
-
Classical Boussinesq problem
CLOSED FORM SOLUTIONS OF THE NAVIER'S EQUATIONS FOR AXISYMMETRIC ELASTICITY PROBLEMS OF THE ELASTIC HALF-SPACE [Volume 52, Issue 4, 2021, Pages 588-618]
-
Closed die forging
Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
-
Cohesive
Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
-
Cold rolling
Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
-
Collaborative Optimization (CO)
Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
-
Collector, entropy generation
Analyses of entropy generation for a solar minichannel flat plate collector system using different types of nanofluids [Volume 52, Issue 4, 2021, Pages 664-681]
-
Collocation Method
Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
-
Combination Method
Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
-
Commercial airplane
Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
-
Common quadratic Lyapunov function
A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
-
Complex Fourier Lagrange Elements
An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
-
Complex Fourier shape functions
An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
-
Compliant mechanism
Optimum design of a micro-positioning compliant mechanism based on neural network metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
-
Composite
Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
-
Composite pipes
Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
-
Composite plates
Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
-
Composite Propeller
Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
-
Composite slabs
Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
-
Composite slabs
A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
-
Composite structures
A review on functionally graded porous structures reinforced by graphene platelets [Volume 52, Issue 4, 2021, Pages 731-750]
-
Compressible viscous flow
Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
-
Compression Power
Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
-
Compressive uniaxial loading
Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
-
Computational fluid dynamic (CFD)
Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
-
Computational fluid dynamics (CFD)
Numerical Study of Droplet Generation Process in a Microfluidic Flow Focusing [Volume 46, Issue 2, 2015, Pages 167-175]
-
Conical shells
Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
-
Consistency model, generalized trapezoidal algorithm
A damage model incorporating dynamic plastic yield surface [Volume 47, Issue 1, 2016, Pages 11-24]
-
Constrained Groove Pressing
Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
-
Contact forces
Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
-
Continuum damage mechanics
A damage model incorporating dynamic plastic yield surface [Volume 47, Issue 1, 2016, Pages 11-24]
-
Convection
On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
-
Convection
Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
-
Convective drying
Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
-
Convective motion
The onset of Casson fluid convection in a permeable medium layer produced by purely inner heating with magnetic field [(Articles in Press)]
-
Convective-radiative fin
Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
-
Conventional lay-ups
Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams [Volume 53, Issue 2, 2022, Pages 190-203]
-
Cooling tower
Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
-
Cost
Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
-
Cost minimization
Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
-
Coulomb fission
A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
-
Coupled oil pipes
Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
-
Cover plate moment connection
Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
-
Crack
Attractor Based Analysis of Centrally Cracked Plate Subjected to Chaotic Excitation [Volume 51, Issue 1, 2020, Pages 199-212]
-
Crack
Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
-
Crack
A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
-
Crack
Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
-
Cracked nanobeam
A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [Volume 52, Issue 3, 2021, Pages 408-422]
-
Crankshaft
Mathematical model for dynamic analysis of internal combustion engines [Volume 54, Issue 4, 2023, Pages 607-622]
-
Creep
Thermo-elastic creep analysis and life assessment of rotating thick pressurized cylindrical shells using third-order shear deformation theory [Volume 52, Issue 3, 2021, Pages 366-393]
-
Creep mechanism
Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
-
Creep Response
The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
-
Critical buckling load factors
On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
-
Critical flow velocity
Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
-
Cryo-mill
Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
-
CSZ
Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
-
Cu complex
The influence of hydro alcoholic extract of Satureja mutica zinc Oxide nanoparticle and zinc complex against coagulase gene expression on standard and clinical isolated of methicillin resistant staphylococcus aureus [Volume 53, Issue 1, 2022, Pages 41-54]
-
CUDA
Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
-
Cure cycle optimization
Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
-
Curved walking
From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
-
Cyclic Loading
Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
-
Cyclic void growth modeling
Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
-
Cylinders with Varying Thickness
An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
D
-
Damped Model Updating
Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
-
Darcy- Forchheimer flow
Therapeutic applications of Darcy-Forchheimer hybrid nanofluid flow and mass transfer over a stretching sheet [Volume 53, Issue 4, 2022, Pages 585-598]
-
Darrieus VAWT
Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
-
Darrieus VAWT cluster
Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
-
Data-driven control
From Data to Stability: A Novel Approach for Controlling Unknown Linear Time-Invariant Systems with Performance Enhancement [(Articles in Press)]
-
Decoupling
A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
-
Deep Neural Networks (DNN)
Optimum design of a micro-positioning compliant mechanism based on neural network metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
-
Deflection
Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
-
Deflection, vibration and buckling
Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT [Volume 55, Issue 2, 2024, Pages 289-321]
-
Deformation Rate
Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
-
Delamination defect
Buckling Behavior of Composite Plates with a Pre-central Circular Delamination Defect under in-Plane Uniaxial Compression [Volume 48, Issue 1, 2017, Pages 111-122]
-
Dent
Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
-
Dental implants
Impact of additive manufacturing on advances in the design and production of the dental implants [Volume 54, Issue 2, 2023, Pages 323-335]
-
Depth parameter
Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
-
Design and implementation
Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
-
Design of Experiments
Improving Product Quality of Wire Drawing Process Using Design of Experiments [Volume 55, Issue 1, 2024, Pages 8-25]
-
Design of Experiments (DOE)
A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
-
Dielectrophoresis
Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
-
Differential equations of equilibrium
ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
-
Differential evolution algorithm
Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
-
DIFFERENTIAL QUADRATURE ELEMENT METHOD
A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
-
DIFFERENTIAL QUADRATURE ELEMENT METHOD
Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
-
Differential quadrature method
A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
-
Differential quadrature method
Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
-
Differential quadrature method
Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams [Volume 53, Issue 2, 2022, Pages 190-203]
-
Different Lay-ups
Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
-
Dimensionless Frequency Ratio
Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
-
DIRECT ITERATIVE METHOD
A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
-
Disk Cutters
Experimental investigation of hard spline milling using a newly developed disk cutter [Volume 53, Issue 1, 2022, Pages 116-125]
-
Dissipation
The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
-
DLGS
Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
-
Dowel
Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
-
DQM
Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
-
Draft tube
Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
-
Droplet
A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
-
Droplet deformation
Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
-
Drying Stresses
Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
-
Dry Machining
Experimental investigation of hard spline milling using a newly developed disk cutter [Volume 53, Issue 1, 2022, Pages 116-125]
-
Duffing Oscillators
Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
-
Dynamic analysis
Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading [Volume 53, Issue 1, 2022, Pages 1-23]
-
Dynamic Behavior
Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires [Volume 53, Issue 2, 2022, Pages 219-243]
-
Dynamic compression
Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
-
Dynamic Programming
Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
-
Dynamic response
Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
-
Dynamic response
Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
-
Dynamic yield surface
A damage model incorporating dynamic plastic yield surface [Volume 47, Issue 1, 2016, Pages 11-24]
E
-
Economic Analysis
Numerical and Economic Study of Performance of Centrifugal Pump as Turbine [Volume 48, Issue 2, 2017, Pages 151-160]
-
Efficiency
Performance Improvements of a Centrifugal Pump with Different Impellers using Polymer Additive [Volume 48, Issue 2, 2017, Pages 199-206]
-
Efficiency
Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
-
E-FGM
A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
-
Eigenvalue equations
Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
-
Eigenvalue equations
Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
-
Elastic Half-Space
CLOSED FORM SOLUTIONS OF THE NAVIER'S EQUATIONS FOR AXISYMMETRIC ELASTICITY PROBLEMS OF THE ELASTIC HALF-SPACE [Volume 52, Issue 4, 2021, Pages 588-618]
-
Elastic medium
Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
-
Elastic medium
Stability Analysis of a Laminated Composite Micro Scaled Beam Embedded in Elastic Medium using Modified Coupled Stress Theory [Volume 55, Issue 1, 2024, Pages 26-38]
-
Elasto- plastic analysis
Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
-
Elasto-plastic analysis
Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
-
Electrical circuit
Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis [Volume 54, Issue 4, 2023, Pages 467-481]
-
Electrical Discharge Machining (EDM)
An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
-
Electricity distribution network
Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
-
Electric vehicles
Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
-
Electroosmotic flow
Slip effect on the unsteady electroosmotic and pressure-driven flows of two-layer fluids in a rectangular microchannel [Volume 52, Issue 1, 2021, Pages 12-26]
-
ELI-NP
Vibration analysis of the Gamma-Ray element in the ELI-NP interaction chamber (IC) [Volume 55, Issue 2, 2024, Pages 275-288]
-
Elliptic cylinders
Performance Study of Partially Heated Annulus Filled with Two-Phase Nanofluid: Energy Perspective [Volume 55, Issue 1, 2024, Pages 39-50]
-
Elzaki transform method
Elzaki transform method for finding solutions to two-dimensional elasticity problems in polar coordinates formulated using Airy stress functions [Volume 51, Issue 2, 2020, Pages 302-310]
-
EMHD
Thermal Radiation and Shape Factor Effects on Electro-magnetohydrodynamic Tri-hybrid Williamson Liquid Flow Around a Cylinder [(Articles in Press)]
-
Energy
Energy, exergy and economic analysis of an improved Kalina cycle integrated with a proton exchange membrane fuel cell [Volume 53, Issue 2, 2022, Pages 244-263]
-
Energy Absorption
A review on structural response and energy absorption of sandwich structures with 3D printed core [Volume 54, Issue 4, 2023, Pages 623-644]
-
ENERGY ANALYSIS
Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
-
ENERGY ANALYSIS
Performance Study of Partially Heated Annulus Filled with Two-Phase Nanofluid: Energy Perspective [Volume 55, Issue 1, 2024, Pages 39-50]
-
Energy Efficiency
Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
-
ENGINEERING DRAWING
A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
-
ENGINEERING DRAWING
A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
-
Enhanced Oil Recovery
Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
-
Entransy dissipation
Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
-
Environmental impact
Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
-
Equilibrium Equations
Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
-
Equivalent mass
Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
-
Equivalent stiffness
Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
-
Error Compensation Model
A Nonlinear Error Compensator for FDM 3D Printed Part Dimensions Using a Hybrid Algorithm Based on GMDH Neural Network [Volume 52, Issue 3, 2021, Pages 451-477]
-
ESL theory
Unified refined beam theory applied to the Spectral Finite Element Method for analysis of laminated composites. [Volume 52, Issue 1, 2021, Pages 44-60]
-
Euler–Bernoulli beam
Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
-
Euler-Bernoulli Beam
Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
-
Euler-Bernoulli Beam
Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
-
Eulerian-Lagrangian
Numerical Details of Convective Heat Transfer by Micro-Encapsulated PCM Case Study: Annular Slurry Flow [Volume 53, Issue 1, 2022, Pages 66-82]
-
Euler-Lagrange differential equation
Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
-
Evaporation
Sessile and Pendant Micro-Liter Drops Evaporate at Different Rates: An Experimental Approach [Volume 47, Issue 1, 2016, Pages 109-119]
-
Evaporation
Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
-
Evolutionary Optimization Algorithms
Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
-
Exact 3-D theory
Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
-
Exact static theory
Exact analytic solution for static bending of 3-D plate under transverse loading [Volume 53, Issue 3, 2022, Pages 309-331]
-
Exergy
Energy, exergy and economic analysis of an improved Kalina cycle integrated with a proton exchange membrane fuel cell [Volume 53, Issue 2, 2022, Pages 244-263]
-
Exergy loss
Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
-
Expanding or Contracting walls
On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
-
Expanding or Contracting walls, Chebychev Spectral Collocation method
Analysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 225-232]
-
Explicit analytical solutions
Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
-
Exponentially
Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
-
Extrusion
Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
F
-
FAIR ASSESSMENT
A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
-
Fairing
Design and simulation Sandwich Composite Fairing Shells Using FEM Analyzing [Volume 53, Issue 1, 2022, Pages 55-65]
-
Falling Velocity
Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
-
Fast Kurtogram
A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
-
Fatigue parameters
Fatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy [Volume 49, Issue 2, 2018, Pages 367-372]
-
Fault Detection
Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
-
FEA
Thread Pitch Variant in Orthodontic Mini-screws: A 3-D Finite Element Analysis [Volume 46, Issue 2, 2015, Pages 257-265]
-
FEM
Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
-
FEM
Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
-
FEM
Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
-
FEM
Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading [Volume 53, Issue 1, 2022, Pages 1-23]
-
FEM
The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
-
FEM Mesh Sensitivity
Design and simulation Sandwich Composite Fairing Shells Using FEM Analyzing [Volume 53, Issue 1, 2022, Pages 55-65]
-
Femur Bone
An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
-
FENE-P Fluid
Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
-
FE simulation
Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
-
FG Coating
Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
-
FG cylindrical shells
Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
-
FG graded auxetic cell
The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
-
FGM
Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
-
FGM
Assessment of Radial basis function based meshfree method for the buckling analysis of rectangular FGM plate using HSDT and Strong form formulation [Volume 53, Issue 3, 2022, Pages 332-347]
-
FGM nanoplate
Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
-
FG nanobeam
Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
-
FG Nanoplates
Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
-
FG plate
A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
-
FG sandwich beam
On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
-
FG sandwich plate
Coupled loading hygro-thermo-mechanical Effect on the stability of imperfect functionally graded sandwich plates [(Articles in Press)]
-
Fiber metal laminates
Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams [Volume 53, Issue 2, 2022, Pages 190-203]
-
Fifth Order Shear Deformation Theory
Buckling analysis of 2D functionally graded porous beams using novel higher order theory [Volume 53, Issue 3, 2022, Pages 393-413]
-
Finite Difference Method
Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
-
Finite differences scheme
A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
-
Finite element
A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
-
Finite element
An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests [Volume 51, Issue 1, 2020, Pages 91-97]
-
Finite Element Analysis
Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
-
Finite Element Analysis (FEA)
Optimum design of a micro-positioning compliant mechanism based on neural network metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
-
Finite Element Method
Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
-
Finite Element Method
Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
-
Finite Element Method
Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
-
Finite Element Method
On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
-
Finite Element Method
Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
-
Finite element model
Updating finite element model using frequency domain decomposition method and bees algorithm [Volume 48, Issue 1, 2017, Pages 75-88]
-
Finite Fourier transform
Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
-
Fire
Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
-
Fire resistance
Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
-
Fire resistance
A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
-
First order shear deformation theory
Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
-
First-order shear deformation theory (FSDT)
Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
-
First-order shell theory
Stability analysis of functionally graded graphene platelets-reinforced nanocomposite shells [(Articles in Press)]
-
First-Order Temperature Theory (FTT)
An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
-
First Shear Deformation Plate Theory
Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
-
Five-equation model
A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
-
Flare
Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [Volume 52, Issue 3, 2021, Pages 423-432]
-
Flexibility
Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
-
Flexible SERS substrate
A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
-
Flexible viscoelastic core
Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires [Volume 53, Issue 2, 2022, Pages 219-243]
-
FlexPDE
Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
-
Flexure
Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
-
Flow Patterns
Experimental and numerical investigation of flow patterns in symmetrical spurs [Volume 54, Issue 3, 2023, Pages 425-436]
-
Fluid coupling
Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
-
Fluid flow
Thermal Analysis of a Cylindrical Heat Pipe in a Magnetic Field [Volume 53, Issue 4, 2022, Pages 524-542]
-
Fluid-induced vibration
Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
-
Fluid-Structure Interactions
A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
-
FML
Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
-
Foam
Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
-
Foam core
Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT [Volume 55, Issue 2, 2024, Pages 289-321]
-
Foot and Ankle Complex,,
Sensitivity Analysis of the Finite Element Model of the Foot and Ankle Complex for Vibration Analysis [Volume 54, Issue 1, 2023, Pages 140-149]
-
Forced convection
Analytical solution of pulsating flow and forced convection heat transfer in a pipe filled with porous medium [Volume 52, Issue 4, 2021, Pages 570-587]
-
Forced convection,,
Numerical Study on Convective Heat Transfer Characteristics of Single and Hybrid Nanofluids Flow Through Rectangular Conduits Under Turbulent Flow with Uniform Heat Flux [Volume 53, Issue 4, 2022, Pages 571-584]
-
Forced vibration
Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
-
Forced vibration
The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
-
Forced vibration
Symmetrical Mechanical System Properties-Based Forced Vibration Analysis [Volume 54, Issue 4, 2023, Pages 501-514]
-
Forced Vibration Analysis
Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
-
Fouling
Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
-
Four-bar mechanism
Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
-
Fourier series method
Fourier series method for finding displacements and stress fields in hyperbolic shear deformable thick beams subjected to distributed transverse loads [Volume 53, Issue 1, 2022, Pages 126-141]
-
Fourier transform
Fourier-Homotopy Perturbation Method for Heat and Mass Transfer with 2D Unsteady Squeezing Viscous Flow Problem [Volume 54, Issue 2, 2023, Pages 219-235]
-
Four-Wheel Steering Mobile Robot
Implementation of Behavior-Based Navigation Algorithm on Four-Wheel Steering Mobile Robot [Volume 52, Issue 4, 2021, Pages 619-641]
-
Fracture
Simulation of the Mode I fracture of concrete beam with cohesive models [Volume 48, Issue 2, 2017, Pages 207-216]
-
Fragility
Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
-
Frames
Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
-
Fredholm integro-differential equation
Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
-
Free Vibration
Numerical free vibration analysis of higher-order shear deformable beams resting on two-parameter elastic foundation [Volume 46, Issue 2, 2015, Pages 117-131]
-
Free Vibration
Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
-
Free Vibration
Comparison between the frequencies of FML and composite cylindrical shells using beam modal function model [Volume 50, Issue 2, 2019, Pages 239-245]
-
Free Vibration
Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
-
Free Vibration
Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
-
Free Vibration
Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
-
Free Vibration
Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
-
Free Vibration
The influences of various auxetic cores on natural frequencies and forced vibration behavior of sandwich beam fabricated by 3D printer based on third -order shear deformation theory [Volume 54, Issue 2, 2023, Pages 285-308]
-
Frictional Stir Manufacturing
Modeling and Simulations of Multi-dimensional Thermal Behaviours of Plates during Friction Stir Additive Manufacturing [Volume 53, Issue 3, 2022, Pages 363-378]
-
Friction stir welding
Parametric Analysis for Torque Prediction in Friction Stir Welding Using Machine Learning and Shapley Additive Explanations [Volume 55, Issue 1, 2024, Pages 113-124]
-
FSDT
Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
-
Functional Graded Cable
Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
-
Functional graded nanoplate
Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
-
Functionally Graded
Behavior of functionally graded semiconducting rod with internal heat source under a thermal shock [Volume 55, Issue 1, 2024, Pages 51-61]
-
Functionally graded adherend
Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
-
Functionally Graded Material
Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
-
Functionally Graded Material
Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
-
Functionally Graded Material
Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
-
Functionally Graded Material
A review on stress-driven nonlocal elasticity theory [Volume 52, Issue 3, 2021, Pages 535-552]
-
Functionally Graded Material
Effect of Porosity on the Static Response of Rotating and Non-Rotating Porous Timoshenko Beam [Volume 55, Issue 2, 2024, Pages 209-222]
-
Functionally graded Material (FGM)
Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
-
Functionally graded Material (FGM)
A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
-
Functionally graded Material (FGM)
An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
-
Functionally Graded Materials
Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
-
Functionally Graded Materials
A review on functionally graded porous structures reinforced by graphene platelets [Volume 52, Issue 4, 2021, Pages 731-750]
-
Functionally Graded Materials
Stability analysis of conveying-nanofluid functionally graded nanotube based on nonlocal couple stress theory [Volume 54, Issue 2, 2023, Pages 309-322]
-
Functionally Graded Materials
Material Nonlinear Static Analysis of Axially Functionally Graded Porous Bar Elements [Volume 55, Issue 2, 2024, Pages 223-234]
-
Functionally Graded Materials
Contribution study on factors impacting the vibration behavior of functionally graded nanoplates [(Articles in Press)]
-
Functionally Graded Plates
Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
-
Functionally graded porous
Functionally graded saturated porous structures: A review [Volume 53, Issue 2, 2022, Pages 297-308]
-
Functionally graded porous beam
On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
-
Functionally graded porous beam
Elastostatic behaviour of functionally graded porous beams: novel Kuhn Tucker conditions with R program for mathematical computing [Volume 55, Issue 2, 2024, Pages 165-183]
-
Functionally graded porous materials
Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
-
Functionally graded porous plates
A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
-
Fused Deposition Method
A Nonlinear Error Compensator for FDM 3D Printed Part Dimensions Using a Hybrid Algorithm Based on GMDH Neural Network [Volume 52, Issue 3, 2021, Pages 451-477]
-
Fuzzy
A New Method for Assessment of Engineering Drawing Answer Scripts Using Fuzzy Logic [Volume 51, Issue 1, 2020, Pages 170-183]
-
Fuzzy logic
Fuzzy logic-based variable impedance control for a bilateral teleoperation system under time delay [(Articles in Press)]
-
Fuzzy PID
Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
-
Fuzzy-PID Control
Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
G
-
Galerkin
Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
-
Galerkin
Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
-
Gamma-ray
Vibration analysis of the Gamma-Ray element in the ELI-NP interaction chamber (IC) [Volume 55, Issue 2, 2024, Pages 275-288]
-
Gasket-plate heat exchanger
Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
-
Generalized differential quadrature method (GDQM)
Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
-
Generalized differential quadrature method (GDQM)
Buckling analysis of three-dimensional functionally graded Euler-Bernoulli nanobeams based on the nonlocal strain gradient theory [Volume 53, Issue 1, 2022, Pages 24-40]
-
Generalized Integral Transform Method,,
Generalized Integral Transform Method for the Bending Analysis of Clamped Rectangular Thin Plates [Volume 53, Issue 4, 2022, Pages 599-625]
-
Generic network topology
A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
-
Genetic
Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
-
Genetic algorithm
An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
-
Genetic Algorithm
Numerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming [Volume 45, Issue 1, 2014, Pages 35-45]
-
Genetic Algorithm
Fractional Order PID Controller for Diabetes Patients [Volume 46, Issue 1, 2015, Pages 69-76]
-
Genetic Algorithm
Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
-
Genetic Algorithm
A Genetic Algorithm based Optimization Method in 3D Solid Reconstruction from 2D Multi-View Engineering Drawings [Volume 49, Issue 1, 2018, Pages 161-170]
-
Genetic Algorithm
Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
-
Genetic Algorithm
Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
-
Genetic Algorithm
A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
-
Genetic Algorithm
The Application of Genetic Algorithm to the Optimization of the Maintenance Schedule at a Certain Level of availability and reliability: Case study Cathodic Protection System of Gas Distribution Steel Network [Volume 54, Issue 3, 2023, Pages 455-466]
-
Genetic Algorithm (GA)
An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
-
Geomechanics
Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
-
Geometrically nonlinear Analysis
Geometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
-
Geometrical Parameters
Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
-
Geometrical Parameters
Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
-
Global-local theory
Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires [Volume 53, Issue 2, 2022, Pages 219-243]
-
Globally asymptotically stable
A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
-
GMDH Neural Network
A Nonlinear Error Compensator for FDM 3D Printed Part Dimensions Using a Hybrid Algorithm Based on GMDH Neural Network [Volume 52, Issue 3, 2021, Pages 451-477]
-
GPL
Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT [Volume 55, Issue 2, 2024, Pages 289-321]
-
Graphene oxide
A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
-
Graphene platelet
A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
-
Graphene platelets
A review on functionally graded porous structures reinforced by graphene platelets [Volume 52, Issue 4, 2021, Pages 731-750]
-
Graphene platelets nanocomposite
Stability analysis of functionally graded graphene platelets-reinforced nanocomposite shells [(Articles in Press)]
H
-
Haar wavelet collocation method
Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
-
Hall Current,,
Convective MHD Jeffrey Fluid Flow Due to Vertical Plates with Pulsed Fluid Suction: Numerical study [Volume 54, Issue 1, 2023, Pages 36-48]
-
Halpin–Tsai model
Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
-
Hamilton principle
Variational principle for Schrödinger-KdV system with the M-fractional derivatives [Volume 55, Issue 2, 2024, Pages 235-241]
-
Hamilton's principle
Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
-
Hamilton's principle
Vibration of inhomogeneous fibrous laminated plates using an efficient and simple polynomial refined theory [Volume 52, Issue 2, 2021, Pages 233-245]
-
Hamilton’s principle
Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
-
Hard Gearing
Experimental investigation of hard spline milling using a newly developed disk cutter [Volume 53, Issue 1, 2022, Pages 116-125]
-
HARMONIC BALANCE METHOD
A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
-
Harmonic motion
Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
-
Hashin Damage Criteria
Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
-
Heat exchanger
Optimal Design of Shell-and-Tube Heat Exchanger Based on Particle Swarm Optimization Technique [Volume 46, Issue 1, 2015, Pages 21-29]
-
Heat exchanger
Water thickness effect on the fin efficiency and heat transfer for partially wet-surface heat exchanger [Volume 47, Issue 2, 2016, Pages 195-207]
-
Heat Pipe, Temperature
Thermal Analysis of a Cylindrical Heat Pipe in a Magnetic Field [Volume 53, Issue 4, 2022, Pages 524-542]
-
Heat Sink
Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
-
Heat transfer
Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
-
Heat transfer
Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
-
Heat transfer
On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
-
Heat transfer
Thermal Analysis of a Cylindrical Heat Pipe in a Magnetic Field [Volume 53, Issue 4, 2022, Pages 524-542]
-
Heat transfer
Exergy-Economic Optimization of Gasket-Plate Heat Exchangers [Volume 54, Issue 2, 2023, Pages 254-267]
-
Heat transfer
Free Convection from a One End Closed Vertical Pipe with Annular Fins: A Computational Study [(Articles in Press)]
-
Hemodynamic Properties
Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
-
Hierarchical Fuzzy Control
Routing and avoiding collisions of autonomous robots in unknown environments with fixed and moving obstacles [Volume 53, Issue 2, 2022, Pages 169-182]
-
HIFU
Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
-
HIGH EFFICIENCY DEEP GRINDING
Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
-
Higher-Order
Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
-
Higher-order global-local theory
Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
-
Higher order shear and normal deformations plate theory
Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
-
Higher order shear deformation theory
On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
-
High-Order Shear Deformation Theories
THE RADIAL POINT INTERPOLATION METHOD IN THE BENDING ANALYSIS OF SYMMETRIC LAMINATES USING HSDTS [Volume 52, Issue 4, 2021, Pages 682-716]
-
Hole-Cleaning
Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
-
Hollow cylinder
Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
-
Homotopy Perturbation Method
Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
-
Homotopy Perturbation Method
Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
-
Homotopy Perturbation Method
Nonlinear coupled torsional-radial vibration of single-walled carbon nanotubes using numerical methods [Volume 52, Issue 4, 2021, Pages 642-663]
-
Homotopy Perturbation Method
Fourier-Homotopy Perturbation Method for Heat and Mass Transfer with 2D Unsteady Squeezing Viscous Flow Problem [Volume 54, Issue 2, 2023, Pages 219-235]
-
Honeycomb sandwich structures
Design and simulation Sandwich Composite Fairing Shells Using FEM Analyzing [Volume 53, Issue 1, 2022, Pages 55-65]
-
Horizontal Circular Cylinder
A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
-
Hot forming
Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
-
HSDT Plate
Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
-
Human pluripotent stem cells (PSCs),,
Comparative in silico analysis of CHIR99021, Azakenpaullone and Tricantin interactions with GSK3β, a key protein in stem cell fates [(Articles in Press)]
-
Humidity environment, Multi objective optimization, Magnetic field
Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
-
Hydraulic turbine
Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
-
Hydromechanical Deep Drawing
An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
-
Hydrophobic to Superhydrophobic
Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
-
Hydrostatic pressure
Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
-
Hyperbolic shear deformation beam theory
Fourier series method for finding displacements and stress fields in hyperbolic shear deformable thick beams subjected to distributed transverse loads [Volume 53, Issue 1, 2022, Pages 126-141]
-
Hyperelastic
Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
-
Hyperelastic FGMs
Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
-
Hyperelastic material
Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
-
Hyperelastic Membrane
Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
-
Hyperelastic pressure vessel
Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
-
HYSTERESIS BEHAVIOR
Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
-
Hysteresis Modeling
Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
I
-
IC engines
Mathematical model for dynamic analysis of internal combustion engines [Volume 54, Issue 4, 2023, Pages 607-622]
-
Illyushin' s method
Bending Response of a Rotating Viscoelastic Functionally Graded Porous Disk with Variable Thickness [Volume 54, Issue 4, 2023, Pages 482-500]
-
Immersed Boundary Method
Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
-
Immersed Interface Method
Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
-
Impression creep
Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
-
Inconel 718 super alloy
An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
-
Incremental explosive analysis (IEA)
Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
-
Indirubin, Glioblastoma
Preparation of cationized albumin nanoparticles loaded indirubin by high pressure hemogenizer. [Volume 52, Issue 3, 2021, Pages 498-506]
-
Inertial microfluidics
Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
-
Inertial terms
A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
-
Initial geometric imperfection
Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
-
Inplane bidirectional FGP’ s
Analyzing the Buckling Behavior of In-plane Bidirectional Functionally Graded Porous Plates [(Articles in Press)]
-
Inspection
Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
-
Instability equations
Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
-
Instability equations
Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
-
Instable fluid velocity
Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
-
Intensity parameter
Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
-
Interaction Chamber
Vibration analysis of the Gamma-Ray element in the ELI-NP interaction chamber (IC) [Volume 55, Issue 2, 2024, Pages 275-288]
-
Interface capturing
A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
-
Interface sharpening
A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
-
Internal Forces
Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
-
Internal heat generation
Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
-
Internal Rayleigh number
The onset of Casson fluid convection in a permeable medium layer produced by purely inner heating with magnetic field [(Articles in Press)]
-
Internal stability
A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
-
Intrinsic forces
Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
-
Inverse analysis
Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
-
Inverse problem
A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
-
Inverse solubility
Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
-
Inverted Pendulum Model (IPM)
Energy Dissipation Rate Control Via a Semi-Analytical Pattern Generation Approach for Planar Three-Legged Galloping Robot based on the Property of Passive Dynamic Walking [Volume 46, Issue 1, 2015, Pages 31-39]
-
IPMC
A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
-
IQ method
Large Amplitude Vibration Analysis of Graphene Sheets as Resonant Mass Sensors Using Mixed Pseudo-Spectral and Integral Quadrature Methods [Volume 45, Issue 1, 2014, Pages 61-75]
-
Iran
Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
-
Irreversibility
Analyses of entropy generation for a solar minichannel flat plate collector system using different types of nanofluids [Volume 52, Issue 4, 2021, Pages 664-681]
-
Isentropic Efficiency
Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
K
-
Kalina cycle
Energy, exergy and economic analysis of an improved Kalina cycle integrated with a proton exchange membrane fuel cell [Volume 53, Issue 2, 2022, Pages 244-263]
-
Karaj dam lake
Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
-
Kernel function normalization
Effect of Different Kernel Normalization Procedures on Vibration Behaviour of Calibrated Nonlocal Integral Continuum Model of Nanobeams [Volume 53, Issue 4, 2022, Pages 639-656]
-
Key Words: Binary Alloy
Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
-
Kinetics of swelling
Kinetics of swelling of cylindrical functionally graded temperature-responsive hydrogels [Volume 51, Issue 2, 2020, Pages 464-471]
-
Kirchhoff Plate Theory
Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
-
Kirchhoff theory
Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
-
Knee joint slip
Contact mechanics of human knee joint: Analytical approach [Volume 52, Issue 4, 2021, Pages 553-569]
-
Kuhn-Tucker conditions
Elastostatic behaviour of functionally graded porous beams: novel Kuhn Tucker conditions with R program for mathematical computing [Volume 55, Issue 2, 2024, Pages 165-183]
L
-
Labyrinth weirs
Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
-
Lagrange Equations
Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
-
Lagrange Equations
Analyzing the Buckling Behavior of In-plane Bidirectional Functionally Graded Porous Plates [(Articles in Press)]
-
Lagrange multiplier
Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
-
Lagrange’s equations
Buckling analysis of 2D functionally graded porous beams using novel higher order theory [Volume 53, Issue 3, 2022, Pages 393-413]
-
Lamb Wave
Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
-
Laminated composite beam
Vibration suppression analysis for laminated composite beams embedded actuating magnetostrictive layers [Volume 50, Issue 1, 2019, Pages 69-75]
-
Laminated composite beam
Forced vibration of a magnetoelastic laminated composite beam on Pasternak’s foundation [Volume 52, Issue 3, 2021, Pages 478-497]
-
Laminated Composites
Stability Analysis of a Laminated Composite Micro Scaled Beam Embedded in Elastic Medium using Modified Coupled Stress Theory [Volume 55, Issue 1, 2024, Pages 26-38]
-
Laminated Plate
Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
-
Laminated Plates
Vibration Behaviour of Shear Deformable Laminated Plates Composed of Non-Homogeneous Layers [Volume 55, Issue 2, 2024, Pages 201-208]
-
Landslides,,
Investigating the efficiency of micropiles in the stability of soil slopes; a case study [Volume 54, Issue 1, 2023, Pages 127-139]
-
Laplace transform
Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
-
Laplace transform
Applications of q-Homotopy analysis with Laplace Transform and Pade´ approximate method for Solving Magneto Hydrodynamic boundary-layer equations. [Volume 54, Issue 2, 2023, Pages 204-218]
-
Laplace transforms
A 1D thermoelastic response of skin tissue due to ramp-type heating via a fractional-order Lord–Shulman model [Volume 54, Issue 3, 2023, Pages 365-377]
-
Large epoxy model
Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
-
Lateral stability
Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams [Volume 53, Issue 2, 2022, Pages 190-203]
-
Lattice Boltzmann method
Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
-
Lattice Boltzmann method
Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
-
Lattice Boltzmann method
Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
-
Lattice Boltzmann method
Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
-
Lattice Boltzmann method
The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
-
Layered Composites
Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
-
Layerwise theory
Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
-
League Championship Algorithm
A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
-
Leakage
Multilayer Hydrogel Seals: Numerical Study of Elastic Leak [Volume 53, Issue 4, 2022, Pages 626-638]
-
Learning Vector Quantization (LVQ)
A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
-
Least squares weighted residual method
Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
-
Lee two-phase model
Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
-
Legendre orthonormal polynomials
Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
-
Legendre polynomial
First Principles Derivation of Displacement and Stress Function for Three-Dimensional Elastostatic Problems, and Application to the Flexural Analysis of Thick Circular Plates [Volume 51, Issue 1, 2020, Pages 184-198]
-
Legendre wavelet Collocation method
Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
-
Legendre wavelet Collocation method
Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
-
Legged motion
Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
-
Legged robots
Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
-
Levenberg-Marquardt
Numerical and Neural Network Modeling and control of an Aircraft Propeller [Volume 49, Issue 1, 2018, Pages 63-69]
-
Lid-driven
MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
-
Life assessment
Thermo-elastic creep analysis and life assessment of rotating thick pressurized cylindrical shells using third-order shear deformation theory [Volume 52, Issue 3, 2021, Pages 366-393]
-
Linear dynamic vibration absorber
Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
-
Linear Elastic Fracture mechanics
A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
-
Liquid height
Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
-
Liquid Properties
Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
-
Liver cancer
Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
-
Load level
Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
-
Load transferred to the bone
The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
-
Longitudinal fin
Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
-
Longitudinal rectangular fin
Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
-
Lord and Shulman
A thermo-elastic model with a single relaxation time of an unbounded medium heated by a heat supply and moving vertically [Volume 53, Issue 3, 2022, Pages 431-443]
-
Lord– Shulman theory
Analysis of the Bio-Thermoelasticity Response of Biological Tissues Subjected to Harmonic Heating Using a Refined Green–Lindsay Model [Volume 54, Issue 4, 2023, Pages 588-606]
-
Low cycle fatigue
Predicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections [Volume 48, Issue 1, 2017, Pages 39-52]
-
Low Velocity Impact,,
Investigation of the effect of impactor shape on the behavior of composite sandwich plates with aluminum foam core at low-speed impact: Experimental and physical study [Volume 54, Issue 1, 2023, Pages 150-166]
-
LS-DYNA
Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
M
-
Mach number
Modelling of Suddenly Expanded Flow Process in Supersonic Mach Regime using Design of Experiments and Response Surface Methodology [Volume 49, Issue 1, 2018, Pages 149-160]
-
MAC Method
Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
-
Macro-Segregation
Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
-
Magnetic bar
Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
-
Magnetic effect
MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
-
Magnetic Fluids
Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
-
Magnetic nanoparticles, Magnetic field, Mechanical actuation, Chondrogenesis
Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
-
Magnetic Particles
Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
-
Magnetizable Fluid
Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
-
Magnetohydrodynamic
Thermal Analysis of a Cylindrical Heat Pipe in a Magnetic Field [Volume 53, Issue 4, 2022, Pages 524-542]
-
Magnetohydrodynamic (MHD)
A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
-
Magnetohydrodynamics
Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
-
Magnetohydrodynamics MHD
Exploring Three-Dimensional MHD Maxwell Hybrid Nanofluid Flow: A Computational Study on a Stretching sheet [Volume 55, Issue 1, 2024, Pages 77-91]
-
Malaria
Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
-
Mass Transfer
Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material [Volume 48, Issue 2, 2017, Pages 171-184]
-
Match Asymptotic Expansion
Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
-
Material Identification
The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
-
Material Nonlinearity
Material Nonlinear Static Analysis of Axially Functionally Graded Porous Bar Elements [Volume 55, Issue 2, 2024, Pages 223-234]
-
Mathematical model
Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
-
Mathematical Modeling
Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
-
Mathematical solution
Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
-
Maximum Reduction in Sheet Thickness
An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
-
Maxwell fluid
Exploring Three-Dimensional MHD Maxwell Hybrid Nanofluid Flow: A Computational Study on a Stretching sheet [Volume 55, Issue 1, 2024, Pages 77-91]
-
Maxwell stress functions
ON MAXWELL'S STRESS FUNCTIONS FOR SOLVING THREE DIMENSIONAL ELASTICITY PROBLEMS IN THE THEORY OF ELASTICITY [Volume 49, Issue 2, 2018, Pages 342-350]
-
Maxwell stress tensor
Dielectrophoretic effect of nonuniform electric fields on the protoplast cell [Volume 48, Issue 1, 2017, Pages 1-14]
-
Mechanical analyses
A review on functionally graded porous structures reinforced by graphene platelets [Volume 52, Issue 4, 2021, Pages 731-750]
-
Mechanical analyses
Functionally graded saturated porous structures: A review [Volume 53, Issue 2, 2022, Pages 297-308]
-
Mechanical Behavior
Investigating the Influence of Material Composition on Bending Analysis of Functionally Graded Beams Using a 2D Refined Theory [Volume 55, Issue 1, 2024, Pages 62-76]
-
Mechanical properties
Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
-
Mechanical Properties
Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
-
Mechanical Property
Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
-
Mechanical Vibration
The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
-
Mechanical Vibrations
Damped DQE Model Updating of a Three-Story Frame Using Experimental Data [Volume 51, Issue 2, 2020, Pages 432-442]
-
Mechanosensation
A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
-
Mechanotransduction
Magneto-mechanical Stimulation of Bone Marrow Mesenchymal Stromal Cells for Chondrogenic Differentiation Studies [Volume 49, Issue 2, 2018, Pages 386-394]
-
Mellin transform inversion formula
GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
-
Mellin transform method
GENERAL SOLUTION OF ELASTICITY PROBLEMS IN TWO DIMENSIONAL POLAR COORDINATES USING MELLIN TRANSFORM [Volume 50, Issue 1, 2019, Pages 174-181]
-
Melting process
Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
-
Memory Dependent Derivative
Study of a Half-Space Via a Generalized Dual Phase-lag Model with Variable Thermal Material Properties and Memory-Dependent Derivative [Volume 53, Issue 2, 2022, Pages 264-281]
-
MEMS
Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
-
MEMS
Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
-
MEMS
Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
-
Mesh Density
A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
-
Meshfree
Assessment of Radial basis function based meshfree method for the buckling analysis of rectangular FGM plate using HSDT and Strong form formulation [Volume 53, Issue 3, 2022, Pages 332-347]
-
Meshless method
THE RADIAL POINT INTERPOLATION METHOD IN THE BENDING ANALYSIS OF SYMMETRIC LAMINATES USING HSDTS [Volume 52, Issue 4, 2021, Pages 682-716]
-
Metaconcrete
Dynamic behaviour of concrete containing aggregate resonant frequency [Volume 49, Issue 2, 2018, Pages 380-385]
-
Metal Nanoparticles
Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
-
Metamodel
Optimum design of a micro-positioning compliant mechanism based on neural network metamodeling [Volume 54, Issue 2, 2023, Pages 236-253]
-
Method of Cells (MOC)
Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
-
MHD
Effects of Joule heating and viscous dissipation on Casson nanofluid flow over a stretched sheet with chemical reaction [Volume 53, Issue 4, 2022, Pages 478-493]
-
MHD
Applications of q-Homotopy analysis with Laplace Transform and Pade´ approximate method for Solving Magneto Hydrodynamic boundary-layer equations. [Volume 54, Issue 2, 2023, Pages 204-218]
-
MHD
Numerical Investigation of MHD Carreau Hybrid Nanofluid Flow over a Stretching Sheet in a Porous Medium with Viscosity Variations and Heat Transport [Volume 54, Issue 3, 2023, Pages 410-424]
-
MHD flow
Unsteady Magneto Hydro Dynamic Flow of a Second Order Fluid over an Oscillating Sheet with a Second Order Slip Flow Model [Volume 47, Issue 2, 2016, Pages 209-218]
-
Microbeams
Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
-
Microcantilever
Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
-
Microcapsule
Numerical Details of Convective Heat Transfer by Micro-Encapsulated PCM Case Study: Annular Slurry Flow [Volume 53, Issue 1, 2022, Pages 66-82]
-
Microchannel
Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
-
Microchannels
A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
-
Microfluidics
A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
-
Micromechanical Analysis
Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
-
Micropolar fibre-reinforced
Plane waves in a micropolar fibre-reinforced solid and liquid interface for non-insulated boundary under magneto-thermo-elasticity [Volume 53, Issue 2, 2022, Pages 204-218]
-
Micropolar Fluid
A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
-
Micro Scaled Beam
Stability Analysis of a Laminated Composite Micro Scaled Beam Embedded in Elastic Medium using Modified Coupled Stress Theory [Volume 55, Issue 1, 2024, Pages 26-38]
-
Microstructure
Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
-
Microstructure
Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire [Volume 49, Issue 1, 2018, Pages 143-148]
-
Microstructure
Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
-
Microtube
Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
-
Mindlin plate theory
Analytical buckling and post-buckling characteristics of Mindlin micro composite plate with central opening by use of nonlocal elasticity theory [Volume 51, Issue 1, 2020, Pages 231-238]
-
Minimum effort
Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
-
Mixed Convection
MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
-
Modal Analysis
The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
-
Modified Coupled Stress Theory
Stability Analysis of a Laminated Composite Micro Scaled Beam Embedded in Elastic Medium using Modified Coupled Stress Theory [Volume 55, Issue 1, 2024, Pages 26-38]
-
Modified couple stress
Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
-
Modified couple stress theory
Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
-
Modified couple stress theory
Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
-
Modified differential transform method
Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
-
Modified Multiple Scales Method
An analytical solution for nonlinear vibration of floating plate on the fluid by modified multiple scales method [Volume 52, Issue 3, 2021, Pages 433-450]
-
Modified strain gradient theory
Magneto-Thermo mechanical vibration analysis of FG nanoplate embedded on Visco Pasternak foundation [Volume 49, Issue 2, 2018, Pages 395-407]
-
Modulus of elasticity
Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
-
Molecular Dynamics
Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
-
Molecular dynamics simulation
A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [Volume 52, Issue 3, 2021, Pages 408-422]
-
Mono-dispersity
Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
-
Mooney-Rivlin model
Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
-
Mori-Tanaka approach
Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
-
Mori-Tanaka (MT)
Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
-
Moving load
Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
-
Moving Mass
Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
-
MRSA, CuO
The influence of hydro alcoholic extract of Satureja mutica zinc Oxide nanoparticle and zinc complex against coagulase gene expression on standard and clinical isolated of methicillin resistant staphylococcus aureus [Volume 53, Issue 1, 2022, Pages 41-54]
-
Multi-boiling heat transfer
Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
-
Multidisciplinary design feasible (MDF)
Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
-
Multidisciplinary design optimization (MDO)
Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
-
Multi-GPU
Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
-
Multilayer
Multilayer Hydrogel Seals: Numerical Study of Elastic Leak [Volume 53, Issue 4, 2022, Pages 626-638]
-
Multi-layer method (MLM)
Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
-
Multilayer simulation
Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
-
Multi-layers method (MLM)
Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
-
Multi-objective optimization
Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
-
Multi-objective optimization
Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
-
Multi-objective optimization
Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
-
Multi-phase flows
A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
-
Multiple rising bubbles
Hydrodynamic investigation of multiple rising bubbles using lattice Boltzmann method [Volume 50, Issue 1, 2019, Pages 14-26]
-
Multiple Scales method
An analytical solution for nonlinear vibration of floating plate on the fluid by modified multiple scales method [Volume 52, Issue 3, 2021, Pages 433-450]
-
Multiscale composite plate
Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
-
Multi-scale hybrid nanocomposites
A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
-
Multistage compressor
Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
-
MWCNTs
Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
N
-
Nano beam
Buckling analysis of three-dimensional functionally graded Euler-Bernoulli nanobeams based on the nonlocal strain gradient theory [Volume 53, Issue 1, 2022, Pages 24-40]
-
Nanobeams
Analysis of Euler-Bernoulli nanobeams: A mechanical-based solution [Volume 47, Issue 2, 2016, Pages 159-180]
-
Nanocomposite materials
A comprehensive review on modeling of nanocomposite materials and structures [Volume 50, Issue 1, 2019, Pages 197-209]
-
Nanocomposites
Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
-
Nanodisk
Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
-
Nanofluid
On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
-
Nanofluid
On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
-
Nanofluid
Influence of Magnetic Wire Positions on free convection of Fe3O4-Water nanofluid in a Square Enclosure Utilizing with MAC Algorithm [Volume 51, Issue 2, 2020, Pages 323-331]
-
Nanofluid
Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
-
Nanofluid
Thermal Radiation and Magnetic Fields Effects on Nanofluids flowing through Stretch Sheet [Volume 54, Issue 1, 2023, Pages 111-126]
-
Nanofluid
MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
-
Nanofluid, Porous Channel
Analysis of Flow of Nanofluid through a Porous Channel with Expanding or Contracting Walls using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 225-232]
-
Nano fluids
Radiation effect on the flow of Magneto Hydrodynamic nanofluids over a stretching surface with Chemical reaction [Volume 53, Issue 4, 2022, Pages 494-509]
-
Nanoliposomes
Physical and chemical properties of nano-liposome, application in nano medicine [Volume 52, Issue 4, 2021, Pages 751-767]
-
Nanoliposomes applications
Physical and chemical properties of nano-liposome, application in nano medicine [Volume 52, Issue 4, 2021, Pages 751-767]
-
Nanoliposomes fabrication methods
Physical and chemical properties of nano-liposome, application in nano medicine [Volume 52, Issue 4, 2021, Pages 751-767]
-
Nanomedicine
Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
-
Nanoparticle
Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
-
Nano-plate
A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
-
Nanorods
Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
-
Nanosphere
Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
-
Nano-YSZ
Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
-
Natural convection
Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
-
Natural convection
A hybrid scheme of single relaxation time lattice Boltzmann and finite volume methods coupled with discrete ordinates method for combined natural convection and volumetric radiation in an enclosure [Volume 51, Issue 2, 2020, Pages 389-402]
-
Natural convection
Free Convection from a One End Closed Vertical Pipe with Annular Fins: A Computational Study [(Articles in Press)]
-
Navier's differential equations of equilibrium
CLOSED FORM SOLUTIONS OF THE NAVIER'S EQUATIONS FOR AXISYMMETRIC ELASTICITY PROBLEMS OF THE ELASTIC HALF-SPACE [Volume 52, Issue 4, 2021, Pages 588-618]
-
Navier’s method
Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
-
Navier’s method
On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
-
Navier solution
A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
-
Navier' s solution
Investigating the Influence of Material Composition on Bending Analysis of Functionally Graded Beams Using a 2D Refined Theory [Volume 55, Issue 1, 2024, Pages 62-76]
-
Navier-Stokes
Investigation of instable fluid velocity in pipes with internal nanofluid flow based on Navier-Stokes equations [Volume 51, Issue 1, 2020, Pages 122-128]
-
Navier–Stokes equations
Numerical simulation of the mixing layer problem based on a new two-fluid turbulence model [Volume 53, Issue 2, 2022, Pages 282-296]
-
Navigation
Routing and avoiding collisions of autonomous robots in unknown environments with fixed and moving obstacles [Volume 53, Issue 2, 2022, Pages 169-182]
-
Navigation Algorithm
Implementation of Behavior-Based Navigation Algorithm on Four-Wheel Steering Mobile Robot [Volume 52, Issue 4, 2021, Pages 619-641]
-
NEMS
Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
-
NET ZERO ENERGY BUILDINGS (NZEB)
Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
-
Neural Network
Numerical and Experimental Analysis and Optimization of Process Parameters of AA1050 Incremental Sheet Forming [Volume 45, Issue 1, 2014, Pages 35-45]
-
Neural Network
An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
-
Neutral Hole
Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
-
Newtonian fluids
Slip effect on the unsteady electroosmotic and pressure-driven flows of two-layer fluids in a rectangular microchannel [Volume 52, Issue 1, 2021, Pages 12-26]
-
Non-classical elasticity theory
A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
-
Non-equilibrium model
Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
-
Non-homogeneity
Vibration Behaviour of Shear Deformable Laminated Plates Composed of Non-Homogeneous Layers [Volume 55, Issue 2, 2024, Pages 201-208]
-
Non-ideal support
Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
-
Nonlinear
Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
-
Nonlinear analysis
Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
-
Nonlinear Behavior
A review on stress distribution, strength and failure of bolted composite joints [Volume 49, Issue 2, 2018, Pages 415-429]
-
Nonlinear free vibration
Nonlocal effect on the axisymmetric nonlinear vibrational response of nano-disks using variational iteration method [Volume 52, Issue 3, 2021, Pages 507-534]
-
Nonlinear oscillation
Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
-
Nonlinear Solution
Material Nonlinear Static Analysis of Axially Functionally Graded Porous Bar Elements [Volume 55, Issue 2, 2024, Pages 223-234]
-
Nonlinear vibration
Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
-
Nonlinear vibration
A new approach for nonlinear vibration analysis of thin and moderately thick rectangular plates under inplane compressive load [Volume 48, Issue 2, 2017, Pages 185-198]
-
Nonlinear vibration
Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
-
Nonlinear vibration
An analytical solution for nonlinear vibration of floating plate on the fluid by modified multiple scales method [Volume 52, Issue 3, 2021, Pages 433-450]
-
Nonlinear viscoelastic
Nonlinear free vibration of viscoelastic nanoplates based on modified couple stress theory [Volume 49, Issue 1, 2018, Pages 44-53]
-
Nonlocal Elasticity Theory
Free Vibration Analysis of BNNT with Different Cross-Sections via Nonlocal FEM [Volume 49, Issue 2, 2018, Pages 252-260]
-
Nonlocal Elasticity Theory
Axially Forced Vibration Analysis of Cracked a Nanorod [Volume 50, Issue 1, 2019, Pages 63-68]
-
Nonlocal Elasticity Theory
Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
-
Nonlocal Elasticity Theory
Nonlocal effect on the axisymmetric nonlinear vibrational response of nano-disks using variational iteration method [Volume 52, Issue 3, 2021, Pages 507-534]
-
Nonlocal Elasticity Theory
A review on stress-driven nonlocal elasticity theory [Volume 52, Issue 3, 2021, Pages 535-552]
-
Nonlocal integral model
Effect of Different Kernel Normalization Procedures on Vibration Behaviour of Calibrated Nonlocal Integral Continuum Model of Nanobeams [Volume 53, Issue 4, 2022, Pages 639-656]
-
Nonlocal Theory
Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
-
Nonlocal Theory
Free Vibration Analysis of Nanoplates Made of Functionally Graded Materials Based On Nonlocal Elasticity Theory Using Finite Element Method [Volume 49, Issue 1, 2018, Pages 86-101]
-
Nonlocal thermoelasticity
Rotating magneto-thermoelastic rod with finite length due to moving heat sources via Eringen’s nonlocal model [Volume 50, Issue 1, 2019, Pages 118-126]
-
Nonlocal thermos-elasticity
Nonlocal thermoelastic semi-infinite medium with variable thermal conductivity due to a laser short-pulse [Volume 50, Issue 1, 2019, Pages 90-98]
-
Non-Newtonian fluid
Numerical Simulation of Laminar Flow of a Non-Newtonian Bentonite Solution in a Horizontal Pipe [(Articles in Press)]
-
Normal Mode Expansion
Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
-
Normal stresses
Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
-
No-slip boundary condition
The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
-
Numerical Method
Multilayer Hydrogel Seals: Numerical Study of Elastic Leak [Volume 53, Issue 4, 2022, Pages 626-638]
-
Numerical model
The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
-
Numerical simulation
A new calculation method for the temperature of the components of composite slabs under fire [Volume 52, Issue 2, 2021, Pages 206-214]
-
Numerical simulation
Numerical Simulation of Laminar Flow of a Non-Newtonian Bentonite Solution in a Horizontal Pipe [(Articles in Press)]
-
Numerical Simulations
Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
-
Numerical solution
A novel computational procedure based on league championship algorithm for solving an inverse heat conduction problem [Volume 48, Issue 2, 2017, Pages 285-296]
-
Numerical solution
A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
O
-
Octopod
Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
-
OpenFOAM
Numerical Simulation of Atmospheric Boundary Layer Over Laboratory Scale Two-Dimensional Hill Using Pressure-Driven Boundary Condition [Volume 53, Issue 3, 2022, Pages 379-392]
-
OpenMP
Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
-
Optimization
An empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm [Volume 46, Issue 2, 2015, Pages 267-277]
-
Optimization
Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
-
Optimization
Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
-
Optimization
Surface hardness improvement in high efficiency deep grinding process by optimization of operating parameters [Volume 49, Issue 1, 2018, Pages 171-178]
-
Optimization
Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
-
Optimization
Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
-
Optimization
Behavioral Optimization of Pseudo-Neutral Hole in Hyperelastic Membranes Using Functionally graded Cables [Volume 49, Issue 2, 2018, Pages 282-291]
-
Optimization
Practical Study and Finite Element Simulation of Production Process of the Bush of Gearbox of Mercedes-Benz 10-Wheel Truck by Closed Die Forging [Volume 52, Issue 1, 2021, Pages 69-84]
-
Optimization
Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
-
Optimum design, Temperature-dependent thermal conductivity
Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
-
Orthotropic viscoelastic
Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
P
-
Padé approximants
Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
-
Padé approximation
Applications of q-Homotopy analysis with Laplace Transform and Pade´ approximate method for Solving Magneto Hydrodynamic boundary-layer equations. [Volume 54, Issue 2, 2023, Pages 204-218]
-
Paper-based SERS substrate
A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
-
Parametric Design
Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
-
Parametric resonance
Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
-
Parametric Study
Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
-
Parametric Study
Parametric Analysis for Torque Prediction in Friction Stir Welding Using Machine Learning and Shapley Additive Explanations [Volume 55, Issue 1, 2024, Pages 113-124]
-
Pareto
Pareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm [Volume 51, Issue 1, 2020, Pages 55-65]
-
Partial heating
Performance Study of Partially Heated Annulus Filled with Two-Phase Nanofluid: Energy Perspective [Volume 55, Issue 1, 2024, Pages 39-50]
-
Partial vitreous liquefaction
Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
-
Particle
Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
-
Particle diameter
Numerical simulation of the effect of particle size on the erosion damage in ball valves of pressure reducing station [Volume 52, Issue 1, 2021, Pages 1-11]
-
Particle separation
Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
-
Particle sorting
Dynamics analysis of microparticles in inertial microfluidics for biomedical applications [Volume 50, Issue 1, 2019, Pages 157-164]
-
Passive Control Method
Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
-
Passive walking
Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
-
Passive walking
From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
-
Pasternak foundation
Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
-
PCM
Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
-
PCM
Numerical Details of Convective Heat Transfer by Micro-Encapsulated PCM Case Study: Annular Slurry Flow [Volume 53, Issue 1, 2022, Pages 66-82]
-
Peak temperature
Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
-
PEM fuel cell
Energy, exergy and economic analysis of an improved Kalina cycle integrated with a proton exchange membrane fuel cell [Volume 53, Issue 2, 2022, Pages 244-263]
-
Penman, Montieth and Unsworth method
Evaluation of Evaporation Estimation Methods: a Case Study of Karaj Dam Lake [Volume 48, Issue 1, 2017, Pages 137-150]
-
Pennes' model
Analysis of the Bio-Thermoelasticity Response of Biological Tissues Subjected to Harmonic Heating Using a Refined Green–Lindsay Model [Volume 54, Issue 4, 2023, Pages 588-606]
-
People body vibration
Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
-
Periodic boundary condition
Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
-
Permeable Stretching Sheet
Analytical and Numerical Investigation of Second Grade Magnetohydrodynamics Flow over a Permeable Stretching Sheet [Volume 51, Issue 1, 2020, Pages 239-246]
-
Perturbation method
Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
-
Perturbation Technique
An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
-
Perturbation Technique
Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
-
Perturbation theory
Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
-
P-FGM
A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
-
PFRC theory
Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
-
Phase lags
Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
-
Phase-lags
Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
-
Phase-lags
Study of a Half-Space Via a Generalized Dual Phase-lag Model with Variable Thermal Material Properties and Memory-Dependent Derivative [Volume 53, Issue 2, 2022, Pages 264-281]
-
Physical model
A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
-
Piezoelastic
Studying piezoelastic and piezomagnetoelastic configurations for different excitation frequencies in MEMS energy harvesters [Volume 47, Issue 2, 2016, Pages 241-246]
-
Piezoelectric
A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
-
Piezoelectric energy harvester
Influence of Booster’s Geometry and Circuit’s Resistor on Performance of the Auxetic Energy Harvester - Experimentally Validated Analysis [Volume 54, Issue 4, 2023, Pages 467-481]
-
Piezoelectric Fiber (PZT)
Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
-
Piezoelectric nanowire
Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
-
Piezo fuzzy fiber (PFF)
Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
-
Pipe conveying fluid
Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
-
PIV
A Validation Methodology for Urea Spray on Selective Catalytic Reduction Systems [Volume 53, Issue 2, 2022, Pages 157-168]
-
Plated bolted joints
A review on stress distribution, strength and failure of bolted composite joints [Volume 49, Issue 2, 2018, Pages 415-429]
-
Plate vibration
Dynamics of nonlinear rectangular plates subjected to an orbiting mass based on shear deformation plate theory [Volume 49, Issue 1, 2018, Pages 27-36]
-
Poiseuille Flow
Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
-
Poisson's ratio
Analytical modeling and parametric study of equivalent stiffness for auxetic structures [Volume 54, Issue 3, 2023, Pages 336-346]
-
Pollution diffusion
Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [Volume 52, Issue 3, 2021, Pages 423-432]
-
Polyacrylamide polymer
Performance Improvements of a Centrifugal Pump with Different Impellers using Polymer Additive [Volume 48, Issue 2, 2017, Pages 199-206]
-
Polymer Additives
Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
-
Polymeric nano-composite
Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
-
Polymer nanocomposites (PNCs)
A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
-
Polynomial shape function
Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
-
Polypropylene matrix
On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
-
Poroelastic beam
Dynamic responses of poroelastic beams with attached mass-spring systems and time-dependent, non-ideal supports subjected to moving loads: An analytical approach [Volume 46, Issue 2, 2015, Pages 133-151]
-
Porosities
Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
-
Porosities
Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
-
Porosity
Buckling Analysis of a Fiber Reinforced Laminated Composite Plate with Porosity [Volume 50, Issue 2, 2019, Pages 375-380]
-
Porosity
Bending Response of a Rotating Viscoelastic Functionally Graded Porous Disk with Variable Thickness [Volume 54, Issue 4, 2023, Pages 482-500]
-
Porosity
Efficient Kinematic model for Stability Analysis of Imperfect Functionally Graded Sandwich Plates with Ceramic middle layer and Varied Boundary Edges [Volume 55, Issue 2, 2024, Pages 184-200]
-
Porosity
Material Nonlinear Static Analysis of Axially Functionally Graded Porous Bar Elements [Volume 55, Issue 2, 2024, Pages 223-234]
-
Porosity
A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
-
Porosity
Effect of Porosity on the Static Response of Rotating and Non-Rotating Porous Timoshenko Beam [Volume 55, Issue 2, 2024, Pages 209-222]
-
Porosity
Coupled loading hygro-thermo-mechanical Effect on the stability of imperfect functionally graded sandwich plates [(Articles in Press)]
-
Porosity coefficient
Analyzing the Buckling Behavior of In-plane Bidirectional Functionally Graded Porous Plates [(Articles in Press)]
-
Porosity distribution
A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
-
Porosity effect
Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
-
Porosity index
On Numerical Bending Analysis of Functionally Graded Porous Beam – Effect of Porosity Adapting Higher Order Shear Deformation Theory [Volume 54, Issue 1, 2023, Pages 49-67]
-
Porosity volume fraction
A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
-
Porous
A review on functionally graded porous structures reinforced by graphene platelets [Volume 52, Issue 4, 2021, Pages 731-750]
-
Porous channel
On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
-
Porous channel
On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
-
Porous Fin
Analysis of Heat transfer in Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 271-284]
-
Porous medium
Analytical solution of pulsating flow and forced convection heat transfer in a pipe filled with porous medium [Volume 52, Issue 4, 2021, Pages 570-587]
-
Porous medium
The onset of Casson fluid convection in a permeable medium layer produced by purely inner heating with magnetic field [(Articles in Press)]
-
Porous medium properties
Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
-
Post-buckling
Free vibration analysis of the cracked post-buckled axially functionally graded beam under compressive load [Volume 52, Issue 2, 2021, Pages 256-270]
-
Postural balance
Use a biomechanical experimental setup to analysis the reliability of force plate postural control parameters in chronic ankle instability patients, copers and healthy control [Volume 53, Issue 2, 2022, Pages 183-189]
-
Postural control
Biomechanical differences between individuals with chronic ankle instability, copers and healthy controls in the countermovement jump on the force plate [Volume 53, Issue 3, 2022, Pages 356-362]
-
Potential function
Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
-
Power generation
Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
-
Power Plant
Effect of Wind on Thermal Performance of Heller Dry Cooling Tower [Volume 45, Issue 1, 2014, Pages 1-8]
-
Power-series
Power Series -Aftertreatment Technique for Nonlinear Cubic Duffing and Double-Well Duffing Oscillators [Volume 48, Issue 2, 2017, Pages 297-306]
-
Power series method of Frobenius Introduction
Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
-
Power transmission
Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
-
Preconditioning
A preconditioned solver for sharp resolution of multiphase flows at all Mach numbers [Volume 50, Issue 1, 2019, Pages 41-53]
-
Pressure
Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
-
Pressure distribution
Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
-
Pressure recovery factor
Numerical Study of a Pipe Extension Effect in Draft Tube on Hydraulic Turbine Performance [Volume 51, Issue 1, 2020, Pages 46-54]
-
Pressure vessel
Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
-
Preventive maintenance
The Application of Genetic Algorithm to the Optimization of the Maintenance Schedule at a Certain Level of availability and reliability: Case study Cathodic Protection System of Gas Distribution Steel Network [Volume 54, Issue 3, 2023, Pages 455-466]
-
Primary Cilium
A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
-
Principle of virtual work
Investigating the Influence of Material Composition on Bending Analysis of Functionally Graded Beams Using a 2D Refined Theory [Volume 55, Issue 1, 2024, Pages 62-76]
-
Product Design
A two-phase hybrid product design algorithm using learning vector quantization, design of experiments, and adaptive neuro-fuzzy interface systems to optimize geometric form in view of customers’ opinions [Volume 52, Issue 2, 2021, Pages 271-296]
-
Product Uniformity
An Investigation on the Effects of Optimum Forming Parameters in Hydromechanical Deep Drawing Process Using the Genetic Algorithm [Volume 49, Issue 1, 2018, Pages 54-62]
-
Progressive Collapse
Static and dynamic axial crushing of prismatic thin-walled metal columns [Volume 50, Issue 1, 2019, Pages 27-40]
-
Propagation matrix
Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
-
Propagation matrix
A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
-
Property Gradient Materials
Investigating the Influence of Material Composition on Bending Analysis of Functionally Graded Beams Using a 2D Refined Theory [Volume 55, Issue 1, 2024, Pages 62-76]
-
Protein microtubules
Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
-
Protein Nanoparticles
Preparation of cationized albumin nanoparticles loaded indirubin by high pressure hemogenizer. [Volume 52, Issue 3, 2021, Pages 498-506]
-
Pulsating flow
Analytical solution of pulsating flow and forced convection heat transfer in a pipe filled with porous medium [Volume 52, Issue 4, 2021, Pages 570-587]
-
Pump as turbine
Numerical and Economic Study of Performance of Centrifugal Pump as Turbine [Volume 48, Issue 2, 2017, Pages 151-160]
-
Pure Aluminum Sheet
Multi-objective optimization of geometrical parameters for constrained groove pressing of aluminium sheet using a neural network and the genetic algorithm [Volume 50, Issue 2, 2019, Pages 275-281]
-
P-Wave
Plane waves in a micropolar fibre-reinforced solid and liquid interface for non-insulated boundary under magneto-thermo-elasticity [Volume 53, Issue 2, 2022, Pages 204-218]
Q
-
Quad
Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
-
Quasi-3D plate theory
Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
R
-
Radial Point Interpolation Method (RPIM)
THE RADIAL POINT INTERPOLATION METHOD IN THE BENDING ANALYSIS OF SYMMETRIC LAMINATES USING HSDTS [Volume 52, Issue 4, 2021, Pages 682-716]
-
Radiation
Variation of Parameters Method for Thermal Analysis of Straight Convective- Radiative Fins with Temperature Dependent Thermal Conductivity [Volume 49, Issue 1, 2018, Pages 125-132]
-
Radiation
A Theoretical Study of Steady MHD mixed convection heat transfer flow for a horizontal circular cylinder embedded in a micropolar Casson fluid with thermal radiation [Volume 50, Issue 1, 2019, Pages 165-173]
-
Radiation
Radiation effect on the flow of Magneto Hydrodynamic nanofluids over a stretching surface with Chemical reaction [Volume 53, Issue 4, 2022, Pages 494-509]
-
Railway wheel
Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
-
Raman spectrometry
Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
-
RANDOM FIBROUS NETWORK
Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
-
RANS
Numerical Simulation of Atmospheric Boundary Layer Over Laboratory Scale Two-Dimensional Hill Using Pressure-Driven Boundary Condition [Volume 53, Issue 3, 2022, Pages 379-392]
-
Rayleigh-Benard Convection
Investigation on Instability of Rayleigh-Benard Convection Using Lattice Boltzmann Method with a Modified Boundary Condition [Volume 49, Issue 2, 2018, Pages 231-239]
-
Rayleigh limit
A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy [Volume 51, Issue 2, 2020, Pages 454-463]
-
Rayleigh number
On the onset of triple-diffusive convection in a layer of nanofluid [Volume 47, Issue 1, 2016, Pages 67-77]
-
RBF
Assessment of Radial basis function based meshfree method for the buckling analysis of rectangular FGM plate using HSDT and Strong form formulation [Volume 53, Issue 3, 2022, Pages 332-347]
-
Rectangular thick nanoplate
A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
-
Rectangular thick plate
Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
-
Rectangular Waveguide
Numerical study and genetic algorithm optimization of hot extrusion process to produce rectangular waveguides [Volume 47, Issue 2, 2016, Pages 129-136]
-
Reddy beam
Nonlinear Flow-Induced Flutter Instability of Double CNTs Using Reddy Beam Theory [Volume 46, Issue 1, 2015, Pages 1-12]
-
Refined Lord– Shulman theory
A 1D thermoelastic response of skin tissue due to ramp-type heating via a fractional-order Lord–Shulman model [Volume 54, Issue 3, 2023, Pages 365-377]
-
Refined TPL theory
Analyzing the Thermoelastic Responses of Biological Tissue Exposed to Thermal Shock Utilizing a Three-Phase Lag Theory [Volume 55, Issue 2, 2024, Pages 144-164]
-
Reflection matrix
Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
-
Reflection matrix
A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
-
Regularized boundary condition
The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
-
Regular perturbation method
On The Effect of Nanofluid Flow and Heat Transfer with Injection through an Expanding or Contracting Porous Channel [Volume 49, Issue 1, 2018, Pages 1-8]
-
Renewable Energies
Analysis and Optimization using Renewable Energies to Get Net-Zero Energy Building for Warm Climate [Volume 48, Issue 2, 2017, Pages 331-344]
-
Repairable system
The Application of Genetic Algorithm to the Optimization of the Maintenance Schedule at a Certain Level of availability and reliability: Case study Cathodic Protection System of Gas Distribution Steel Network [Volume 54, Issue 3, 2023, Pages 455-466]
-
Representative Volume Element (RVE)
Computational Studies on Mechanical Properties of Carbon-based Nanostructures Reinforced Nanocomposites [Volume 50, Issue 2, 2019, Pages 413-419]
-
Residual stress
Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
-
Residual stress
Numerical Analysis of explosion effects on the redistribution of residual stresses in the underwater welded pipe [Volume 47, Issue 1, 2016, Pages 121-128]
-
Resonant frequency
Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
-
Response surface
Modeling and Optimizing Creep behavior of A356 Al Alloy in Presence of Nickel Using Response Surface Method [Volume 52, Issue 4, 2021, Pages 717-730]
-
Response Surface Optimization
The Application of Modal Testing for Non-destructive Material Identification of a Car Seat Frame [Volume 52, Issue 1, 2021, Pages 61-68]
-
R-Glass/Epoxy
Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
-
Ring rolling
Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
-
Ring rolling
Prediction and optimization of load and torque in ring rolling process through development of artificial neural network and evolutionary algorithms [Volume 49, Issue 2, 2018, Pages 292-303]
-
Ritz Method
Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
-
Ritz Method
A Ritz Formulation for Vibration Analysis of Axially Functionally Graded Timoshenko-Ehrenfest Beams [Volume 53, Issue 1, 2022, Pages 102-115]
-
Robot control
Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
-
Robot gait
Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
-
Robotic device
Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
-
Robotic mechanism
Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
-
Robot stability
Dynamics, Stability Analysis and Control of a Mammal-Like Octopod Robot Driven by Different Central Pattern Generators [Volume 50, Issue 1, 2019, Pages 76-89]
-
Rotating beams
Effect of Porosity on the Static Response of Rotating and Non-Rotating Porous Timoshenko Beam [Volume 55, Issue 2, 2024, Pages 209-222]
-
Rotating Fluids
Nonlinear stability of rotating two superposed magnetized fluids with the technique of the homotopy perturbation [Volume 49, Issue 2, 2018, Pages 261-273]
-
Rotating thick cylinder
Elastic analysis of functionally graded rotating thick cylindrical pressure vessels with exponentially-varying properties using power series method of Frobenius [Volume 48, Issue 1, 2017, Pages 89-98]
-
Rotating thick cylindrical shell
Thermo-elastic creep analysis and life assessment of rotating thick pressurized cylindrical shells using third-order shear deformation theory [Volume 52, Issue 3, 2021, Pages 366-393]
-
Rotation Matrix
Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
-
Rough surface
Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
-
R program
Elastostatic behaviour of functionally graded porous beams: novel Kuhn Tucker conditions with R program for mathematical computing [Volume 55, Issue 2, 2024, Pages 165-183]
-
Rule of Mixtures
Flexural behavior of porous functionally graded plates using a novel higher order theory [Volume 51, Issue 2, 2020, Pages 361-373]
-
Rule of Mixtures
Free vibration behavior of bi-directional functionally graded plates with porosities using a refined first order shear deformation theory [Volume 51, Issue 2, 2020, Pages 374-388]
-
Rule of Mixtures
A refined inverse hyperbolic shear deformation theory for bending analysis of functionally graded porous plates [Volume 51, Issue 2, 2020, Pages 417-431]
-
Rule of Mixtures
Analyzing the Buckling Behavior of In-plane Bidirectional Functionally Graded Porous Plates [(Articles in Press)]
-
Runge-Kutta technique
Thermal Radiation and Magnetic Fields Effects on Nanofluids flowing through Stretch Sheet [Volume 54, Issue 1, 2023, Pages 111-126]
-
Runner Angle
Effects of Casting Speed and Runner Angle on Macrosegregation of Aluminium-Copper Alloy. [Volume 49, Issue 2, 2018, Pages 373-379]
S
-
S2-Glass/Epoxy
Fluid-structure interaction studies on marine propeller [Volume 50, Issue 2, 2019, Pages 381-386]
-
Sandwich FG plates
A new higher-order theory for the static and dynamic responses of sandwich FG plates [Volume 52, Issue 1, 2021, Pages 102-125]
-
Sandwich nanocomposite structure
Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT [Volume 55, Issue 2, 2024, Pages 289-321]
-
Sandwich plate
Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
-
Sandwich plate
Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
-
Sandwich plate
Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires [Volume 53, Issue 2, 2022, Pages 219-243]
-
Sandwich plate
Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
-
Sandwich structure
A review on structural response and energy absorption of sandwich structures with 3D printed core [Volume 54, Issue 4, 2023, Pages 623-644]
-
Satellite
Design and simulation Sandwich Composite Fairing Shells Using FEM Analyzing [Volume 53, Issue 1, 2022, Pages 55-65]
-
Satureja Mutica
The influence of hydro alcoholic extract of Satureja mutica zinc Oxide nanoparticle and zinc complex against coagulase gene expression on standard and clinical isolated of methicillin resistant staphylococcus aureus [Volume 53, Issue 1, 2022, Pages 41-54]
-
Scale parameter
A review on stress-driven nonlocal elasticity theory [Volume 52, Issue 3, 2021, Pages 535-552]
-
SCFS thick plate,,
Static Bending Solutions for an Isotropic Rectangular Clamped/Simply Supported Plates Using 3-D Plate Theory [Volume 54, Issue 1, 2023, Pages 1-18]
-
Schrö dinger equation
Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
-
SCR
A Validation Methodology for Urea Spray on Selective Catalytic Reduction Systems [Volume 53, Issue 2, 2022, Pages 157-168]
-
Script Code
Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
-
SDL
A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
-
Second-order shear deformation
Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
-
Semi-analytical method
Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
-
Semiconducting
Behavior of functionally graded semiconducting rod with internal heat source under a thermal shock [Volume 55, Issue 1, 2024, Pages 51-61]
-
Semi-inverse method
Shock-like Waves with Finite Amplitudes [Volume 55, Issue 1, 2024, Pages 1-7]
-
Sensitivity
Size-dependent on vibration and flexural sensitivity of atomic force microscope [Volume 50, Issue 1, 2019, Pages 191-196]
-
Sensitivity
Micro-cantilevered MEMS Biosensor for Detection of Malaria Protozoan Parasites [Volume 50, Issue 1, 2019, Pages 99-107]
-
Sensitivity analysis
Updating finite element model using frequency domain decomposition method and bees algorithm [Volume 48, Issue 1, 2017, Pages 75-88]
-
Sensitivity analysis
Evaluating computational performances of hyperelastic models on supraspinatus tendon uniaxial tensile test data [Volume 52, Issue 1, 2021, Pages 27-43]
-
Sensor
Transverse Sensing of Simply Supported Truncated Conical Shells [Volume 49, Issue 2, 2018, Pages 212-230]
-
Sensor Placement
Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
-
Serial manipulator
Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
-
Series active variable-geometry suspension
Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
-
Shape factor
Thermal Radiation and Shape Factor Effects on Electro-magnetohydrodynamic Tri-hybrid Williamson Liquid Flow Around a Cylinder [(Articles in Press)]
-
Shape Memory Alloy
Real Time Finite Element Simulation of Thick and Thin Sandwich Plate with Viscoelastic Core and Embedded SMA Wires [Volume 53, Issue 2, 2022, Pages 219-243]
-
SHAPE-MEMORY ALLOY (SMA)
Modeling SMA actuated systems based on Bouc-Wen hysteresis model and feed-forward neural network [Volume 49, Issue 1, 2018, Pages 9-17]
-
Shape optimization
Effect of different aero-structural optimization in the commercial airplane [Volume 54, Issue 2, 2023, Pages 268-284]
-
Shape parameters
An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
-
Shear and normal deformation
A new higher-order theory for the static and dynamic responses of sandwich FG plates [Volume 52, Issue 1, 2021, Pages 102-125]
-
Shear buckling,,
Shear buckling response of FG porous annular sector plate reinforced by graphene platelet subjected to different shear loads [Volume 54, Issue 1, 2023, Pages 68-86]
-
Shear deformation
On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
-
Shear stress fields
Least squares weighted residual method for finding the elastic stress fields in rectangular plates under uniaxial parabolically distributed edge loads [Volume 51, Issue 1, 2020, Pages 107-121]
-
Shell
A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
-
Shell and tube heat exchanger
Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
-
Shell and tube heat exchanger
Minimization of Entransy Dissipations of a Finned Shell and Tube Heat Exchanger [Volume 50, Issue 2, 2019, Pages 246-255]
-
Shell of revolution
Parametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure [Volume 51, Issue 2, 2020, Pages 281-287]
-
Shock Wave
Shock-like Waves with Finite Amplitudes [Volume 55, Issue 1, 2024, Pages 1-7]
-
Short Piezo Fuzzy Fiber Reinforced Composite (SPFFRC)
Estimation of Elastic and Piezoelectric Properties of Short Piezo Fuzzy Fiber Reinforced Composite Using Method of Cells Micromechanics Approach [(Articles in Press)]
-
Silver nanocubes
Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
-
Silver nanospheres
Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
-
SIMPLE method
Numerical simulation of the mixing layer problem based on a new two-fluid turbulence model [Volume 53, Issue 2, 2022, Pages 282-296]
-
Single phase flow
Solving Single Phase Fluid Flow Instability Equations Using Chebyshev Tau- QZ Polynomial [Volume 50, Issue 1, 2019, Pages 135-139]
-
Single-walled carbon nanotube
On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
-
Size effect
Pull-in behaviors of micro-beam made of bidirectional functionally grade materials based on modified couple stress theory [Volume 51, Issue 2, 2020, Pages 472-481]
-
Sliding mode
Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
-
SMA
Deflection, buckling and vibration analyses for a sandwich nanocomposite structure with foam core reinforced with GPLs and SMAs based on TSDBT [Volume 55, Issue 2, 2024, Pages 289-321]
-
SMA Actuator
Hysteresis Modeling, Identification and Fuzzy PID Control of SMA Wire Actuators Using Generalized Prandtl-Ishlinskii Model with Experimental Validation [Volume 50, Issue 2, 2019, Pages 263-274]
-
Small scale
Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
-
Small scale effect
Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
-
Smart Materials
A theoretical model for analysis of ionic polymer metal composite sensors in fluid environments [Volume 51, Issue 1, 2020, Pages 21-29]
-
Smart Water Injection
Review of Enhanced Oil Recovery Decision Making in Complex Carbonate Reservoirs: Fluid Flow and Geomechanics Mechanisms [Volume 52, Issue 2, 2021, Pages 350-365]
-
Soft core
Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
-
Softcore and hardcore
On the buckling analysis of functionally graded sandwich beams using a unified beam theory [Volume 51, Issue 2, 2020, Pages 443-453]
-
Soil bulk density
Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
-
Soil compaction
Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
-
Solar charging station
Energy cost minimization in an electric vehicle solar charging station via dynamic programming [Volume 51, Issue 2, 2020, Pages 275-280]
-
Sonography
Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
-
Source parameters
Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
-
Special cells
Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [Volume 52, Issue 3, 2021, Pages 423-432]
-
Specific heat capacity
Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
-
Spectral Finite Element Method
Unified refined beam theory applied to the Spectral Finite Element Method for analysis of laminated composites. [Volume 52, Issue 1, 2021, Pages 44-60]
-
Speed of drawing
Improving Product Quality of Wire Drawing Process Using Design of Experiments [Volume 55, Issue 1, 2024, Pages 8-25]
-
Spherical Vessel
Parametric investigation of autofrettage process in thick spherical vessel made of functionally graded materials [Volume 47, Issue 1, 2016, Pages 99-107]
-
SPH method
Replacing friction model with interaction between particles in analyzing orthogonal and rotational cutting processes using SPH method [Volume 52, Issue 2, 2021, Pages 297-306]
-
Spillways
Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
-
Spline Milling
Experimental investigation of hard spline milling using a newly developed disk cutter [Volume 53, Issue 1, 2022, Pages 116-125]
-
Sprain
Biomechanical differences between individuals with chronic ankle instability, copers and healthy controls in the countermovement jump on the force plate [Volume 53, Issue 3, 2022, Pages 356-362]
-
Spur
Experimental and numerical investigation of flow patterns in symmetrical spurs [Volume 54, Issue 3, 2023, Pages 425-436]
-
Squeeze film damping
Dynamic and Static Pull-in instability of electrostatically actuated nano/micro membranes under the effects of Casimir force and squeezed film damping [Volume 47, Issue 2, 2016, Pages 219-230]
-
SSFS thick plate
Analytical Elasticity Solution for Accurate Prediction of Stresses in a Rectangular Plate Bending Analysis Using Exact 3-D Theory [Volume 54, Issue 2, 2023, Pages 167-185]
-
Stability
Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
-
Stability
Dynamical stability of cantilevered pipe conveying fluid in the presence of linear dynamic vibration absorber [Volume 50, Issue 1, 2019, Pages 182-190]
-
Stall margin
Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
-
Stand-off distance
Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
-
Static analysis
3-node Basic Displacement Functions in Analysis of Non-Prismatic Beams [Volume 46, Issue 1, 2015, Pages 77-91]
-
Static Magnetic Field
Effect of static magnetic field on the hemodynamic properties of blood flow containing magnetic substances [Volume 47, Issue 2, 2016, Pages 181-194]
-
Static torsion
Nonlocal elasticity theory for static torsion of the bi-directional functionally graded microtube under magnetic field [Volume 51, Issue 1, 2020, Pages 30-36]
-
Statistical features
A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
-
Steel deck
Influence of load-level and effective thickness on the fire resistance of composite slabs with steel deck [Volume 52, Issue 2, 2021, Pages 193-205]
-
Steering
Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
-
Steering
From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
-
Stenosis
Modelling of the Dynamics of an immersed body in a microchannel with stenosis using the immersed boundary method [Volume 50, Issue 2, 2019, Pages 228-238]
-
Stephane number
Numerical Details of Convective Heat Transfer by Micro-Encapsulated PCM Case Study: Annular Slurry Flow [Volume 53, Issue 1, 2022, Pages 66-82]
-
Stepped Spillway
Numerical Investigations of Two-Phase Flow on a Stepped Spillway under Various Conditions [Volume 52, Issue 2, 2021, Pages 332-349]
-
STIFF INCLUSION
Effect of Stress-Fiber Inclusion on the Local Stiffness of Cell Cytoskeleton Probed by AFM Indentation: Insights from a Discrete Network Model [Volume 50, Issue 2, 2019, Pages 289-294]
-
Stiffness
The axisymmetric computational study of a femoral component to analysis the effect of titanium alloy and diameter variation. [Volume 51, Issue 2, 2020, Pages 403-410]
-
Stiffness control
Stiffness control of a legged robot equipped with a serial manipulator in stance phase [Volume 48, Issue 1, 2017, Pages 27-38]
-
Strain gradient elasticity theory
Buckling analysis of three-dimensional functionally graded Euler-Bernoulli nanobeams based on the nonlocal strain gradient theory [Volume 53, Issue 1, 2022, Pages 24-40]
-
Strain gradient theory
Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
-
Strain gradient theory
Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
-
Stress analysis
Size dependent nano-spherical pressure vessels based on strain gradient theory [Volume 52, Issue 2, 2021, Pages 307-319]
-
Stress distribution
Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
-
Stress Intensity Factor
A two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis [Volume 49, Issue 2, 2018, Pages 335-341]
-
Stretching sheet
Numerical study of Casson nanofluid over an elongated surface in presence of Joule heating and viscous dissipation: Buongiorno model analysis [Volume 53, Issue 3, 2022, Pages 414-430]
-
Stretching sheet
Radiation effect on the flow of Magneto Hydrodynamic nanofluids over a stretching surface with Chemical reaction [Volume 53, Issue 4, 2022, Pages 494-509]
-
Stretching sheet
Therapeutic applications of Darcy-Forchheimer hybrid nanofluid flow and mass transfer over a stretching sheet [Volume 53, Issue 4, 2022, Pages 585-598]
-
Stretching sheet
Thermal Radiation and Magnetic Fields Effects on Nanofluids flowing through Stretch Sheet [Volume 54, Issue 1, 2023, Pages 111-126]
-
Stretching sheet
Exploring Three-Dimensional MHD Maxwell Hybrid Nanofluid Flow: A Computational Study on a Stretching sheet [Volume 55, Issue 1, 2024, Pages 77-91]
-
Stretching Sheet Porous Medium
Numerical Investigation of MHD Carreau Hybrid Nanofluid Flow over a Stretching Sheet in a Porous Medium with Viscosity Variations and Heat Transport [Volume 54, Issue 3, 2023, Pages 410-424]
-
String stability
A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
-
Structural response
A review on structural response and energy absorption of sandwich structures with 3D printed core [Volume 54, Issue 4, 2023, Pages 623-644]
-
Subcooled flow boiling
Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition [Volume 50, Issue 2, 2019, Pages 308-314]
-
Subcooled flow boiling
Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
-
Surface effects
Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory [Volume 47, Issue 2, 2016, Pages 137-150]
-
Surface-enhanced Raman spectroscopy (SERS)
A Review of Paper-Based Substrates as Surface-Enhanced Raman Spectroscopy (SERS) Biosensors and Microfluidic Paper-Based SERS Platforms [Volume 53, Issue 1, 2022, Pages 142-156]
-
Surface Enhanced Raman Spectroscopy (SERS)
Review of the application and mechanism of surface enhanced raman spectroscopy (sers) as biosensor for the study of biological and chemical analyzes [Volume 51, Issue 2, 2020, Pages 501-509]
-
Surface premelting
Influence of spherical and cubical geometry of silver nanoparticles on thermal characteristics [Volume 54, Issue 3, 2023, Pages 378-389]
-
Surface with a hole
Four different types of a single drop dripping down a hole under gravity by lattice Boltzmann method [Volume 47, Issue 1, 2016, Pages 89-98]
-
Sutured porous material
Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
-
Switched nonlinear cascade systems
A new approach based on state conversion to stability analysis and control design of switched nonlinear cascade systems [Volume 51, Issue 1, 2020, Pages 129-136]
-
S-W-S connection
Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
-
Symmetric Laminated Plates
THE RADIAL POINT INTERPOLATION METHOD IN THE BENDING ANALYSIS OF SYMMETRIC LAMINATES USING HSDTS [Volume 52, Issue 4, 2021, Pages 682-716]
T
-
Taguchi Method
Optimum parameters of nonlinear integrator using design of experiments based on Taguchi method [Volume 46, Issue 2, 2015, Pages 233-241]
-
Taxol
Influence of taxol and CNTs on the stability analysis of protein microtubules [Volume 50, Issue 1, 2019, Pages 140-147]
-
Temperature-Dependent Properties
An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
-
Temperature-dependent thermal conductivity
Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
-
Temperature-Dependent Thermal Conductivity and Internal Heat Generation, Chebyshev spectral collocation method
Analysis of Heat transfer in Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 271-284]
-
Temperature distribution
Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
-
Temperature distribution
An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
-
Temperature gradients
Optimization of thermal curing cycle for a large epoxy model [Volume 50, Issue 2, 2019, Pages 282-288]
-
Temperature profile
Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
-
Temperature profile
Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
-
Temperature-responsive hydrogel
Kinetics of swelling of cylindrical functionally graded temperature-responsive hydrogels [Volume 51, Issue 2, 2020, Pages 464-471]
-
Tensile Strength
Improving Product Quality of Wire Drawing Process Using Design of Experiments [Volume 55, Issue 1, 2024, Pages 8-25]
-
TGA
Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
-
Thermal barrier coating
Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
-
Thermal conductivity
Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
-
Thermal conductivity coefficient
On the Thermal Conductivity of Carbon Nanotube/Polypropylene Nanocomposites by Finite Element Method [Volume 49, Issue 1, 2018, Pages 70-85]
-
Thermal Energy Storage
Investigation on the effect of metal foam properties on the PCM melting performance subjected to various heat fluxes [Volume 52, Issue 2, 2021, Pages 320-331]
-
Thermal load
Multi objective optimization of the vibration analysis of composite natural gas pipelines in nonlinear thermal and humidity environment under non-uniform magnetic field [Volume 48, Issue 1, 2017, Pages 53-64]
-
Thermal performance
Analysis of Heat transfer in Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation using Chebychev Spectral Collocation Method [Volume 48, Issue 2, 2017, Pages 271-284]
-
Thermal performance
Heat Transfer Study of Convective-Radiative Fin under the influence of Magnetic Field using Legendre Wavelet Collocation Method [Volume 49, Issue 2, 2018, Pages 274-281]
-
Thermal Shock
Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
-
Thermal Shock
Analyzing the Thermoelastic Responses of Biological Tissue Exposed to Thermal Shock Utilizing a Three-Phase Lag Theory [Volume 55, Issue 2, 2024, Pages 144-164]
-
Thermal stability
Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 49, Issue 1, 2018, Pages 37-43]
-
Thermal Strain
An Analytical Solution for Temperature Distribution and Thermal Strain of FGM Cylinders with Varying Thickness and Temperature-Dependent Properties Using Perturbation Technique [Volume 51, Issue 1, 2020, Pages 144-156]
-
Thermo-elastic
Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
-
Thermoelastic analysis
Size-dependent thermoelastic analysis of rotating nanodisks of variable thickness [Volume 51, Issue 2, 2020, Pages 340-360]
-
Thermoelasticity
Internal heat source in a temperature dependent thermoelastic half space with microtemperatures [Volume 49, Issue 2, 2018, Pages 351-358]
-
Thermoelasticity
Thermoelastic response of microbeams under a magnetic field rested on two-parameter viscoelastic foundation [Volume 51, Issue 2, 2020, Pages 332-339]
-
Thermoelasticity
Thermoelastic Response of a Rotating Hollow Cylinder Based on Generalized Model with Higher Order Derivatives and Phase-Lags [Volume 51, Issue 1, 2020, Pages 81-90]
-
Thermoelasticity
Modified couple stress model for thermoelastic microbeams due to temperature pulse heating [Volume 53, Issue 1, 2022, Pages 83-101]
-
Thermoelasticity
Study of a Half-Space Via a Generalized Dual Phase-lag Model with Variable Thermal Material Properties and Memory-Dependent Derivative [Volume 53, Issue 2, 2022, Pages 264-281]
-
Thermoelasticity
The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
-
Thermoelastic theory
A thermo-elastic model with a single relaxation time of an unbounded medium heated by a heat supply and moving vertically [Volume 53, Issue 3, 2022, Pages 431-443]
-
Thermo-Mechanical Stress
Evaluation of Thermo-mechanical stress in work rolls of ring rolling mill under thermal and mechanical loading [Volume 49, Issue 2, 2018, Pages 323-334]
-
The virtual work principle
A novel quasi-3D refined HSDT for static bending analysis of porous functionally graded Plates [(Articles in Press)]
-
Thick cylinder
Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
-
Thick cylindrical pressure vessel
Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
-
Thick cylindrical shell
Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
-
Thickness of water layer
Water thickness effect on the fin efficiency and heat transfer for partially wet-surface heat exchanger [Volume 47, Issue 2, 2016, Pages 195-207]
-
Thick plate
A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
-
Thick rectangular plates
Effect of higher order shear and normal deformations theory in buckling analysis of thick porous functionally graded plates [Volume 54, Issue 3, 2023, Pages 347-364]
-
Thick-walled
A review of functionally graded thick cylindrical and conical shells [Volume 48, Issue 2, 2017, Pages 357-370]
-
Thick-walled sphere
Elasto-plastic solution for thick-walled spherical vessels with an inner FGM layer [Volume 50, Issue 1, 2019, Pages 1-13]
-
Thin Elastic Layer
A finite elements study on the role of primary cilia in sensing mechanical stimuli to cells by calculating their response to the fluid flow [Volume 47, Issue 1, 2016, Pages 35-44]
-
Thin-wall beam
Comparative study on the lateral stability strength of laminated composite and fiber-metal laminated I-shaped cross-section beams [Volume 53, Issue 2, 2022, Pages 190-203]
-
Third -order beam theory
Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading [Volume 53, Issue 1, 2022, Pages 1-23]
-
Third-order shear deformation
Applications of higher order shear deformation theories on stress distribution in a five layer sandwich plate [Volume 48, Issue 2, 2017, Pages 233-252]
-
Third order shear deformation theory
Elastostatic behaviour of functionally graded porous beams: novel Kuhn Tucker conditions with R program for mathematical computing [Volume 55, Issue 2, 2024, Pages 165-183]
-
Third-order shear deformation theory
Thermo-elastic creep analysis and life assessment of rotating thick pressurized cylindrical shells using third-order shear deformation theory [Volume 52, Issue 3, 2021, Pages 366-393]
-
Three-dimensional model
Modeling and Simulations of Multi-dimensional Thermal Behaviours of Plates during Friction Stir Additive Manufacturing [Volume 53, Issue 3, 2022, Pages 363-378]
-
Three-directional functionally graded materials (TDFGMs)
Buckling analysis of three-dimensional functionally graded Euler-Bernoulli nanobeams based on the nonlocal strain gradient theory [Volume 53, Issue 1, 2022, Pages 24-40]
-
Three-Layer Plate
Investigation of the effect of angle beam transducer parameters on the lamb wave field in the three–layer plate by normal mode expansion method [Volume 51, Issue 2, 2020, Pages 482-485]
-
Three Stage Centrifugal Compressor
Investigation of energy consumption reduction in multistage compression process and its solutions [Volume 50, Issue 2, 2019, Pages 219-227]
-
Time delay
Fuzzy logic-based variable impedance control for a bilateral teleoperation system under time delay [(Articles in Press)]
-
Time-Frequency Domain
A new technique for bearing fault detection in the time-frequency domain [Volume 51, Issue 1, 2020, Pages 137-143]
-
Timoshenko beams
Effect of Porosity on the Static Response of Rotating and Non-Rotating Porous Timoshenko Beam [Volume 55, Issue 2, 2024, Pages 209-222]
-
Timoshenko Beam Theory
Comparison study between layered and functionally graded composite beams for static deflection and stress analyses [Volume 51, Issue 2, 2020, Pages 294-301]
-
Timoshenko-Ehrenfest beam
A Ritz Formulation for Vibration Analysis of Axially Functionally Graded Timoshenko-Ehrenfest Beams [Volume 53, Issue 1, 2022, Pages 102-115]
-
Tip gap
Numerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor [Volume 50, Issue 1, 2019, Pages 54-62]
-
Tissue modeling
Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
-
Topology optimization
Multi-objective Optimization of web profile of railway wheel using Bi-directional Evolutionary Structural Optimization [Volume 48, Issue 2, 2017, Pages 307-318]
-
Total Lagrangian
Geometrically nonlinear analysis of axially functionally graded beams by using finite element method [Volume 51, Issue 2, 2020, Pages 411-416]
-
Transformation matrix
Flexibility Matrix and Stiffness Matrix of 3D Curved Beam with Varying Curvature and Varying Cross-Sectional Area using Finite Displacement Transfer Method [Volume 54, Issue 4, 2023, Pages 552-576]
-
Transient analysis
Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
-
Transient thermo-elastic
Transient thermoelastic analysis of FGM rotating thick cylindrical pressure vessels under arbitrary boundary and initial conditions [Volume 48, Issue 1, 2017, Pages 15-26]
-
Trapezoidal V-shaped cantilever
Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
-
Triangular
Numerical investigation of natural convection phenomena in uniformly heated trapezoidal Cylinder inside an elliptical Enclosure [Volume 50, Issue 2, 2019, Pages 315-323]
-
Triangular beam
Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
-
Triangular sectioned weirs
Determination of hydraulic characteristics of flow over a triangular sectioned weir by using experimental and numerical modeling. [Volume 52, Issue 2, 2021, Pages 215-232]
-
Tri-hybrid nanoliquid
Thermal Radiation and Shape Factor Effects on Electro-magnetohydrodynamic Tri-hybrid Williamson Liquid Flow Around a Cylinder [(Articles in Press)]
-
Tube Hydroforming
Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
-
Tumor ablation
Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
-
Turbomachinery
Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
-
Turbulence fluid flow
Impeller and volute design and optimization of the centrifugal pump with low specific speed in order to extract performance curves [Volume 49, Issue 2, 2018, Pages 359-366]
-
Turbulence Modeling
Numerical Simulation of Atmospheric Boundary Layer Over Laboratory Scale Two-Dimensional Hill Using Pressure-Driven Boundary Condition [Volume 53, Issue 3, 2022, Pages 379-392]
-
Turbulent Flow
Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
-
Turning
Analysis of 3D Passive Walking Including Turning Motions for the Finite-width Rimless Wheel [Volume 46, Issue 1, 2015, Pages 63-68]
-
Turning
From Passive Dynamic Walking to Passive Turning of Biped walker [Volume 47, Issue 1, 2016, Pages 24-34]
-
T-way
Simultaneous hydroforming of bulge- and T-zone in 304 stainless steel and 70/30 brass tubes [Volume 51, Issue 1, 2020, Pages 213-230]
-
Two-fluid model
Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
-
Two-fluid model
Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
-
Two-fluid model
Numerical simulation of the mixing layer problem based on a new two-fluid turbulence model [Volume 53, Issue 2, 2022, Pages 282-296]
-
Two-Phase
Performance Study of Partially Heated Annulus Filled with Two-Phase Nanofluid: Energy Perspective [Volume 55, Issue 1, 2024, Pages 39-50]
-
Two phase flow
Stability analysis of stratified two-phase liquid-gas flow in a horizontal pipe [Volume 50, Issue 2, 2019, Pages 256-262]
-
Two phase flow
Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
-
Two-phase flow
Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
-
Two-phase flow
Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
-
Type-II Fuzzy Logic Controller
Routing and avoiding collisions of autonomous robots in unknown environments with fixed and moving obstacles [Volume 53, Issue 2, 2022, Pages 169-182]
U
-
UAV
Designing and implementation of an unmanned aerial vehicle for inspection of electricity distribution networks [Volume 47, Issue 1, 2016, Pages 79-87]
-
Ultrasmall particles
A review on the mechanics of inertial microfluidics [Volume 52, Issue 1, 2021, Pages 168-192]
-
Ultrasonic Guided Waves
Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
-
Ultrasound imaging
Design, Evaluation and Prototyping of a New Robotic Mechanism for Ultrasound Imaging [Volume 50, Issue 1, 2019, Pages 108-117]
-
Ultraviolet Effects
The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
-
Under-Balanced Drilling
Effects of Annulus Geometry and Liquid Properties on the Well Conditions during UBD Operation [Volume 52, Issue 2, 2021, Pages 246-255]
-
Under-Balanced Drilling (UBD)
Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production [Volume 49, Issue 2, 2018, Pages 314-322]
-
Under-Balanced Drilling (UBD)
Investigation of influential factors on well temperature for gas-liquid two-phase flow in under-balanced drilling operation [Volume 50, Issue 2, 2019, Pages 210-218]
-
Underwater explosion (UNDEX)
Incremental explosive analysis and its application to performance-based assessment of stiffened and unstiffened plates [Volume 48, Issue 2, 2017, Pages 253-270]
-
Uniaxial stretching
Mechanical properties of CNT reinforced nano-cellular polymeric nanocomposite foams [Volume 51, Issue 2, 2020, Pages 288-293]
-
Unicycle Mobile Robot
Implementation of Behavior-Based Navigation Algorithm on Four-Wheel Steering Mobile Robot [Volume 52, Issue 4, 2021, Pages 619-641]
-
Unimorph Piezoelectric vibrator
Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
-
Unsteady flow
Unsteady Magneto Hydro Dynamic Flow of a Second Order Fluid over an Oscillating Sheet with a Second Order Slip Flow Model [Volume 47, Issue 2, 2016, Pages 209-218]
-
Unsteady squeezing flow
Fourier-Homotopy Perturbation Method for Heat and Mass Transfer with 2D Unsteady Squeezing Viscous Flow Problem [Volume 54, Issue 2, 2023, Pages 219-235]
-
Urea Spray
A Validation Methodology for Urea Spray on Selective Catalytic Reduction Systems [Volume 53, Issue 2, 2022, Pages 157-168]
V
-
Valve opening
Numerical Simulation of the Effect of Valve Opening and Particle Concentration on the Erosion Damage in Ball Valves of Pressure Reducing Station [Volume 50, Issue 1, 2019, Pages 127-134]
-
Variable fill coupling
Modified mathematical model for variable fill fluid coupling [Volume 49, Issue 2, 2018, Pages 408-414]
-
Variable foundation
Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
-
Variable internal heat generation
Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
-
Variable thermal conductivity
Prediction of Temperature distribution in Straight Fin with variable Thermal Conductivity and Internal Heat Generation using Legendre Wavelet Collocation Method [Volume 48, Issue 2, 2017, Pages 217-224]
-
Variable Thermal Material Properties
Study of a Half-Space Via a Generalized Dual Phase-lag Model with Variable Thermal Material Properties and Memory-Dependent Derivative [Volume 53, Issue 2, 2022, Pages 264-281]
-
Variable thickness
Nonlinear analysis of radially functionally graded hyperelastic cylindrical shells with axially-varying thickness and non-uniform pressure loads based on perturbation theory [Volume 50, Issue 2, 2019, Pages 324-340]
-
Variable thickness
Nonlinear analytical solution of nearly incompressible hyperelastic cylinder with variable thickness under non-uniform pressure by perturbation technique [Volume 50, Issue 2, 2019, Pages 395-412]
-
Variable thickness
Thermoelastic analysis of rotating thick-walled cylindrical pressure vessels with linear variable thickness under bi-directional temperature [Volume 54, Issue 4, 2023, Pages 515-532]
-
Variable thickness
Bi-Directional Thermo-Elastic Analysis of Pressurized Thick Cylindrical Shell with Nonlinear Variable Thickness [Volume 55, Issue 1, 2024, Pages 125-143]
-
Variational iteration method
Usage of the Variational Iteration Technique for Solving Fredholm Integro-Differential Equations [Volume 50, Issue 2, 2019, Pages 303-307]
-
Variational Kantorovich-Vlasov method
Exact Analytical Solutions to Bending Problems of SFrSFr Thin Plates Using Variational Kantorovich-Vlasov Method [Volume 54, Issue 2, 2023, Pages 186-203]
-
Variational theory
Variational principle for the Kaup-Newell system [Volume 54, Issue 3, 2023, Pages 405-409]
-
Variation parameter method
On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
-
VARTM
Composite Adhesive-Bonded Joint Reinforcement by Incorporation of Nano-Alumina Particles [Volume 47, Issue 2, 2016, Pages 231-239]
-
Vehicle safety
Lateral safety enhancement in a full dynamic vehicle model based on series active variable-geometry suspension [Volume 52, Issue 1, 2021, Pages 154-167]
-
Vehicular platoons
A new virtual leader-following consensus protocol to internal and string stability analysis of longitudinal platoon of vehicles with generic network topology under communication and parasitic delays [Volume 48, Issue 2, 2017, Pages 345-356]
-
Vibration
Active control vibration of circular and rectangular plate with Quantitative Feedback Theory (QFT) Method [Volume 47, Issue 2, 2016, Pages 261-271]
-
Vibration
A study on effect of crack on free vibration of thick rectangular plate with initial geometric imperfection using differential quadrature method [Volume 50, Issue 2, 2019, Pages 358-365]
-
Vibration
A concise review of nano-plates [Volume 50, Issue 2, 2019, Pages 420-429]
-
Vibration
Simulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection [Volume 51, Issue 1, 2020, Pages 72-80]
-
Vibration
The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
-
Vibration
Vibration Behaviour of Shear Deformable Laminated Plates Composed of Non-Homogeneous Layers [Volume 55, Issue 2, 2024, Pages 201-208]
-
Vibrational analysis
A comparative study of crack detection in nanobeams using molecular dynamics simulation, analytical formulations, and finite element method [Volume 52, Issue 3, 2021, Pages 408-422]
-
Vibration analysis
Application of Halpin-Tsai Method in Modelling and Size-dependent Vibration Analysis of CNTs/fiber/polymer Composite Microplates. [Volume 47, Issue 1, 2016, Pages 45-52]
-
Vibration analysis
Refined plate theory for free vibration analysis of FG nanoplates using the nonlocal continuum plate model [Volume 48, Issue 1, 2017, Pages 123-136]
-
Vibration analysis
Free vibration and buckling analysis of third-order shear deformation plate theory using exact wave propagation approach [Volume 49, Issue 1, 2018, Pages 102-124]
-
Vibration analysis
A wave-based computational method for free vibration and buckling analysis of rectangular Reddy nanoplates [Volume 51, Issue 2, 2020, Pages 253-274]
-
Vibration analysis
Effect of Different Kernel Normalization Procedures on Vibration Behaviour of Calibrated Nonlocal Integral Continuum Model of Nanobeams [Volume 53, Issue 4, 2022, Pages 639-656]
-
Vibration analysis
Vibration analysis of the Gamma-Ray element in the ELI-NP interaction chamber (IC) [Volume 55, Issue 2, 2024, Pages 275-288]
-
Vibration and buckling analysis
Nonlinear Vibration and Stability Analysis of Beam on the Variable Viscoelastic Foundation [Volume 48, Issue 1, 2017, Pages 99-110]
-
Vibration answer
Analysis of the dynamic behavior of the car user in the irregular terrain [Volume 47, Issue 2, 2016, Pages 151-158]
-
Vibration energy harvesting
Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester [Volume 47, Issue 2, 2016, Pages 247-259]
-
Vibrations
Vibration of inhomogeneous fibrous laminated plates using an efficient and simple polynomial refined theory [Volume 52, Issue 2, 2021, Pages 233-245]
-
Viscoelastic
Transient thermo-visco-elastic response of a functionally graded non-axisymmetric cylinder [Volume 46, Issue 2, 2015, Pages 191-204]
-
Viscoelastic
Vibration of FG viscoelastic nanobeams due to a periodic heat flux via fractional derivative model [Volume 50, Issue 1, 2019, Pages 148-156]
-
Viscoelastic
The Effect of Short-Range Radiation of Type C and B Ultraviolet on the Mechanical Properties of Skin Fibroblasts [Volume 50, Issue 2, 2019, Pages 366-374]
-
Viscoelastic
Mechanical behavior analysis of a clamped-clamped micro-beam with stepped viscoelastic layer under electrostatic excitation [Volume 51, Issue 2, 2020, Pages 486-497]
-
Viscoelastic
Parametric study of Sandwich Plates with Viscoelastic, Auxetic Viscoelastic and Orthotropic Viscoelastic Core Using a New Higher Order Global-Local Theory [Volume 52, Issue 1, 2021, Pages 126-153]
-
Viscoelastic
Viscoelastic effects on nonlinear dynamics of microplates with fluid interaction based on consistent couple stress theory [Volume 52, Issue 3, 2021, Pages 394-407]
-
Viscoelastic adhesive
Viscoelastic analysis of stress distribution in balanced and unbalanced adhesively bonded single-lap joints with functionally graded adherends under the Reddy model [Volume 50, Issue 2, 2019, Pages 341-357]
-
Viscoelastic annular plate
Dynamic response determination of viscoelastic annular plates using FSDT – perturbation approach [Volume 51, Issue 1, 2020, Pages 98-106]
-
Visco-elastic foundation
Vibration analysis of double bonded composite pipe reinforced by BNNTs conveying oil [Volume 46, Issue 2, 2015, Pages 93-105]
-
Viscoelastic foundation
Dynamic analysis of functionally graded carbon nanotube (FGCNT) reinforced composite beam resting on viscoelastic foundation subjected to impulsive loading [Volume 53, Issue 1, 2022, Pages 1-23]
-
Viscoelasticity
An Enhanced Finite Element method for Two Dimensional Linear Viscoelasticity using Complex Fourier Elements [Volume 51, Issue 1, 2020, Pages 157-169]
-
Viscoelasticity
Bending Response of a Rotating Viscoelastic Functionally Graded Porous Disk with Variable Thickness [Volume 54, Issue 4, 2023, Pages 482-500]
-
Viscoelastic model
Design and Fabrication of a Portable 1-DOF Robotic Device for Indentation Tests [Volume 49, Issue 1, 2018, Pages 179-188]
-
Viscoelastic-Newtonian fluid
Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
-
Viscoelastic properties
Study and simulation of the effective factors on soil compaction by tractors wheels using the finite element method [Volume 46, Issue 2, 2015, Pages 107-115]
-
Viscoelastic RANS Model
Parametric study of a viscoelastic RANS turbulence model in the fully developed channel flow [Volume 48, Issue 1, 2017, Pages 65-74]
-
Visco-Pasternak foundation
Monotonous, symmetric, and nonsymmetric patterns of porous core in vibration study of nano-composite sandwich plate bonded by piezoelectric sheets [Volume 53, Issue 3, 2022, Pages 444-477]
-
Viscous
On the Analysis of Laminar Flow of Viscous Fluid through a Porous Channel with Suction/Injection at Slowly Expanding or Contracting Walls [Volume 48, Issue 2, 2017, Pages 319-330]
-
Visualization
A Validation Methodology for Urea Spray on Selective Catalytic Reduction Systems [Volume 53, Issue 2, 2022, Pages 157-168]
-
Vitreous
Numerical simulation of the fluid dynamics in a 3D spherical model of partially liquefied vitreous due to eye movements under planar interface conditions [Volume 50, Issue 2, 2019, Pages 387-394]
-
VOF model
Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models [Volume 51, Issue 1, 2020, Pages 37-45]
-
Void fraction
Analysis of the nonlinear axial vibrations of a cantilevered pipe conveying pulsating two-phase flow [Volume 51, Issue 2, 2020, Pages 311-322]
-
Voids
The study of vibrations in the context of porous micropolar media thermoelasticity and the absence of energy dissipation [Volume 54, Issue 3, 2023, Pages 437-454]
-
Von Karman strain
Nonlocal effect on the axisymmetric nonlinear vibrational response of nano-disks using variational iteration method [Volume 52, Issue 3, 2021, Pages 507-534]
-
Vortex Flow
Are reported methods for synthesizing nanoparticles and microparticles by magnetic stirrer reproducible? [Volume 51, Issue 2, 2020, Pages 498-500]
-
VUMAT
Modification of exponential based hyperelastic strain energy to consider free stress initial configuration and Constitutive modeling [Volume 49, Issue 1, 2018, Pages 189-196]
W
-
Wave form
MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
-
Wave Propagation
Torsional wave propagation in 1D and two dimensional functionally graded rod [Volume 51, Issue 1, 2020, Pages 1-21]
-
Wave Reflection Coefficient
Ultrasonic guided waves reflection from simple dent in pipe for defect rate estimation and parameters determination of axisymmetric wave generation source [Volume 51, Issue 1, 2020, Pages 66-71]
-
Waviness
A brief review on the influences of nanotubes' entanglement and waviness on the mechanical behaviors of CNTR polymer nanocomposites [Volume 51, Issue 1, 2020, Pages 247-252]
-
Wavy cavity
MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
-
Wavy pattern
MHD mixed convection flow of alumina - water nanofluid into a lid-driven cavity with different patterns of wavy sidewalls [Volume 55, Issue 1, 2024, Pages 92-112]
-
Weak form
A Ritz Formulation for Vibration Analysis of Axially Functionally Graded Timoshenko-Ehrenfest Beams [Volume 53, Issue 1, 2022, Pages 102-115]
-
Weibull function
Techno-Economy Study of wind energy in Khvaf in Razavi Khorasan Province in Iran [Volume 47, Issue 1, 2016, Pages 53-66]
-
WENO schemes
Accelerating high-order WENO schemes using two heterogeneous GPUs [Volume 48, Issue 2, 2017, Pages 161-170]
-
Westervelt equation
Numerical study of the use of high intensity focused ultrasound in Trmo-Ablation of liver tumors in a multilayer tissue model [Volume 54, Issue 3, 2023, Pages 390-404]
-
Williamson fluid
Thermal Radiation and Shape Factor Effects on Electro-magnetohydrodynamic Tri-hybrid Williamson Liquid Flow Around a Cylinder [(Articles in Press)]
-
Wind farm simulation
Exploring Optimal Configurations for a Wind Farm with Clusters of Darrieus VAWT, Using CFD Methodology [Volume 54, Issue 4, 2023, Pages 533-551]
-
Window To Wall Ratio (WWR)
Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
-
Winkler-Pasternak’s medium
Forced vibration of a magnetoelastic laminated composite beam on Pasternak’s foundation [Volume 52, Issue 3, 2021, Pages 478-497]
-
Wire drawing
Improving Product Quality of Wire Drawing Process Using Design of Experiments [Volume 55, Issue 1, 2024, Pages 8-25]
-
Wood density
Design of steel-wood-steel connections at the ambient and elevated temperature [Volume 52, Issue 1, 2021, Pages 85-101]
X
-
XRD
Defects and Structural Analysis of Multi-Wall Carbon Nano Tubes via Ball milling and Cryo-milling [Volume 47, Issue 1, 2016, Pages 1-9]
Y
-
YSZ
Effect of nano-structuration and compounding of YSZ APS TBCs with different thickness on coating performance in thermal shock conditions [Volume 49, Issue 1, 2018, Pages 18-26]
Z
-
Zero-Energy Building
Parametric Study of the Impact of Windows to Wall Ratio on Reduction of Energy Consumption and Environmental Impact of a Zero-Energy Building in Different Orientations [Volume 50, Issue 2, 2019, Pages 295-302]
-
ZnO piezoelectric layer
Nonlocal DQM for a Nonlinear Buckling Analysis of DLGSs Integrated with Zno Piezoelectric Layers [Volume 45, Issue 1, 2014, Pages 9-22]
-
Zonal methodology
Effect of wind velocity and flare height parameters on pollution dispersion from one flare with zonal method [Volume 52, Issue 3, 2021, Pages 423-432]
-
Zou-He boundary condition
The effect of boundary conditions on the accuracy and stability of the numerical solution of fluid flows by Lattice-Boltzmann method [Volume 49, Issue 2, 2018, Pages 240-251]
Your query does not match with any item